User Manual

Oscilloscope Probe Kit

Model P-2E

Instruction Manual

Elenco

Electronics, Inc.

No part of this book shall be reproduced by any means; electronic, photocopying, or

otherwise without written permission from the publisher.

ACCESSORIES

Spare Probe Tip 616002

Insulating Tip 626000

Channel Identifier Clip 626003

IC Tip 626041

Probe Body 626P2E

Adjusting Tool 629014

Sprung Earth Tip 680017

Sprung Hook 680912

BNC Cable Assembly 870035

Ground Lead 874010

Elenco

Electronics, Inc.

150 Carpenter Avenue

Wheeling, IL 60090

(847) 541-3800

www.elenco.com

e-mail: elenco@elenco.com

Made in Taiwan

Channel Identifier Clips

Adjusting Tool

Sprung Hook

Spare Probe Tip

Insulating Tip

IC Tip

Sprung Earth Tip

Ground Lead

Probe Body

BNC Cable

Assembly

PAGE 1
ACCESSORIES Oscilloscope Probe Kit Spare Probe Tip Insulating Tip Channel Identifier Clip IC Tip Probe Body Adjusting Tool Sprung Earth Tip Sprung Hook BNC Cable Assembly Ground Lead 616002 626000 626003 626041 626P2E 629014 680017 680912 870035 874010 Model P-2E Channel Identifier Clips Adjusting Tool BNC Cable Assembly Probe Body Sprung Hook Ground Lead Spare Probe Tip Insulating Tip Sprung Earth Tip IC Tip Elenco® Electronics, Inc.
PAGE 2
INTRODUCTION The P-2E is a passive, high-impedance oscilloscope probe designed and calibrated for use with instruments having an input impedance of 1MΩ shunted by 20pF. However, it may be compensated for use with instruments having an input capacitance of 10 to 35pF. The probe incorporates a two position slide switch in the head which selects attenuation of x1, x10 position. SPECIFICATIONS Position X10 Attenuation Ratio 10:1 Bandwidth DC to 100MHz Rise Time 2.