Specifications
Reference and
Education
Section 18
397
Order Toll Free
1-800-543-4330,
FAX
1-800-765-6960
397
Order Toll Free
1-800-543-4330
Fax
1-800-765-6960
NET 30
Terms
Books . . . . . . . . .403~405
Elenco . . . . . . . .398~400
Kits . . . . . . . . . .397~402
Robotics Kits . . . .398~399
Sam's Photofacts . . . .404
Semiconductors . . . . .See
Section 16
Service and
Repair . . . . . . . .403~405
Transformers . . . . . . .403
Ucando . . . . . . . . . . .402
Velleman Kits . . .400-402
Video Educational
Tapes . . . . . . . . . . . .402
Reference and Education
Miniature LED Blinking Circuit Kit
•Ideal for sign displays or to
simulate auto alarm
•Contains six miniature
LEDs, contains two each
of red, green and yellow
•Alternates flashing
•Dimensions:
1
⁄2" x
1
⁄2" •Uses
9V battery not included
(#292-035)
Order # (kit)
80-745 $4.29
Radio Direction Finder
Connects to any UHF/VHF
amateur radio. Great
for fox hunts and
tracking down unknown
transmitters. The tones in
conjunction with RF signal
level meter will direct you to the
transmitter. Operates on one 9V battery (#292-035).
Order # (ea.)
80-1415 $46.71
Infrared 4 x 8 LED Array Kit
Intended for CCTV
applications, this device
will illuminate any dark
area viewed with a CCD
camera, yet leave that area dark
to the naked eye. The array of 32 LEDs
provide considerably more illumination than that included
with CCTV cameras, with much lower cost and power
consumption than typical infrared lights. Dimensions:
1
⁄2"
(H) x 3" (W) x 2
1
⁄4" (D). Note: Assembly required.
Order # (1-4 kits) (5-9 kits) (10 kits-up)
28-8070 $8.35 $7.77 $6.72
Photo Sensor Kit
Small PC board has
built-in sensor that
detects the presence of
light. The SPDT output
relay energizes when light
is removed. Great hobby
item for automatic night
lights and similar applications. Requires
9~12VDC. Relay contacts 3A. Dimensions:
3
⁄4" (H) x 1
3
⁄4"
(W) x 1
3
⁄4" (D). Note: Assembly required.
Order # (1-4 kits) (5-9 kits) (10 kits-up)
28-8086 $8.46 $7.87 $6.82
Eight Channel Parallel
Port Relay Board Kit
Complete kit includes
circuit board with
eight output relays,
and software for
accessing through
the printer
port of
an IBM
PC or
compatible
computer. Each SPDT
relay may be individually
switched via the PC and is capable of handling a 3A load.
Eight board mounted status LEDs show relays state. Ideal
for controling lights and other electronic devices from a
PC. Because the hardware requirements are minimal
(80286 or later with only 1Mb of HDD space), this kit adds
practical use to obsolete computer equipment. Requires
external 12VDC, 800mA power supply and available
parallel port. Board dimensions: 5
1
⁄
8" (W) x 1"(H) x 2
1
⁄
4"(D).
Assembly required.
Order # (1-4 kits) (5-9 kits) (10 kits-up)
28-6348 $28.79 $26.26 $24.35
Gas Sensor Kit
Intended solely for
educational and
entertainment purposes,
this kit detects the
presence of many types
of flammable gas
including alcohol,
acetone, benzene, propane, and
carbon monoxide. May also be used to
detect the presence of alcohol on the breath.
Output is provided via board mounted LED and SPDT 3A
relay. Dimensions: 1
3
⁄16" (H) x 2
1
⁄4" (W) x 1
3
⁄4" (D).
Note: Assembly required.
Order # (1-4 kits) (5-9 kits) (10 kits-up)
28-8078 $12.64 $11.75 $10.07
Simulated “Ships Horn” Kit
Unique novelty kit produces the sound of a large
ship or barge horn. Intended for use
with an external 8ohm speaker
(not included). Board mounted
potentiometer controls
output level. Requires
12VDC, 600mA.
Audio output 5W max.
Board dimensions: 2
1
⁄4"
(W) x 1" (H) x 1
1
⁄8" (D).
Assembly required.
Order # (1-4 kits) (5-9 kits) (10 kits-up)
28-6326 $7.30 $6.78 $6.19
TV Notch Filter Kit
•Removes unwanted
signals and interferences
from other stations and
outside sources during television viewing •Ideal for
blocking unwanted channels •Applicable for channels
2 through 22 cable
Order # (kit)
80-900 $16.11
Chaser Lights Kit
Use this kit like a theater
marquee. Every fourth
LED chases around the
display to give you a
dazzling effect. You can
use up to 40 LEDs. Only
your imagination limits
the possibilities. This kit contains 16 LEDs. Power
requirements: 5~15VDC. Dimensions: 1.5" x 1.75" •Uses
one 9V battery not included (#292-135)
Order # (kit)
80-2085 $16.11
Wireless Audio/Video Sender
Kit will transmit audio and video
signals over the air to a receiving
TV. Kit may receive signal from
CCTV camera, video
camera, etc. and transmit to
any receiving television. 9V
battery or 12VDC required
for operation. Antenna
also required.
Order # (kit)
28-5850 $10.15
Deluxe Wireless Audio/Video Sender
Kit will transmit audio and
video signals over the air to a
receiving TV. Kit may receive
signal from CCTV camera,
video camera, etc. and
transmit to any
receiving television. Kit
includes deluxe case,
antenna, and internal power
supply. 120VAC required for operation.
Order # (kit)
28-5855 $25.70
FM Transmitter
Kit is surprisingly
powerful despite its
small component count
and operating voltage.
Kit will easily transmit
through floors and walls.
Kit will transmit to any
FM receiver via attached
microphone. 3~5VDC
required for operation.
Order # (kit)
28-5870 $7.16
Audio Amplifiers
•Sound enhancer perfect
for an ultra-sensitive
intercom system •Can
pick-up sounds from
across the room •Comes
with a mini electret
microphone
•Dimensions: 1" x 1
3
⁄4"
•6~12VDC •Uses 9V
battery not included
(#292-035)
Order # Description (kit)
80-690 Kit $11.50
80-3045 Pre-built 30.25
FM Stereo Transmitter Kit
•This kit will transmit
any stereo signal when
plugged into the RCA
jacks to any FM radio
•40dB stereo separation
•Comes with right and
left volume controls
•Uses one 9V battery not
included (#292-035)
Order # (kit)
80-760 $32.95
Sweet 16 Tone
Decoder Kit
This kit operates great
through phone lines,
radios or scanners. The
decoder detects DTMF
data when each button is
pressed and sends a
unique voltage to the
electronics on the printed
circuit board which activates a circuit on or off. There
are 16 different touch tones, 12 of which are on a normal
phone; special key pads have four additional buttons (a, b,
c, d). This decoder gives an output voltage for all 16 tones.
If you want to use all 16, you can build your own board
with 16 relay and driver circuits on it, or to get fancier,
use a flip-flop IC to achieve a toggle effect or a 555 timer
to provide a timing effect. Uses a 9V battery not included
(#292-035). Dimensions: 2.2" x 2.8".
Order # (kit)
80-2100 $35.30
RF Amplifier Kit
RF amplifier takes a high
level signal and amplifies
it to approximately 1V.
Power requirements
12VDC. 50mA-some
surface mount
components.
•Limited quantities
Order # Gain (1MHz) (kit)
80-1090 8db $16.14
80-1095 20db 21.78
Strobe Circuit Kit
•Can be used
as emergency warning
light on autos, radio
tower or anywhere a
strobe light is needed
•Variable flash rate
•Dimensions: 3
1
⁄2" x 1
3
⁄4" •Operates on 6/12VDC
Order # (kit)
80-735 $13.07
18
C51 pg 397 8/1/06 1:43 PM Page 397









