Instruction manual

-16-
PARTS LIST - SECTION E
SEMICONDUCTORS
Qty Symbol Value Description Part #
4 D1-D4 1N4148 Diode 314148
MISCELLANEOUS
Qty Symbol Description Part #
1 PC Board Terminator LD-100 510005
1 J2 F-Connector 590500
1 J1 Modular Jack RJ-45 621028
SECTION E
Terminator
PARTS IDENTIFICATION
F-Connector Modular Jack Diode PC Board
ASSEMBLE THE FOLLOWING COMPONENTS TO THE PC BOARD
In all of the following steps the components must be installed on the top legend side of the PC board. The
board is turned to solder the component leads on the foil side.
D4 - 1N4148 Diode
D3 - 1N4148 Diode
D2 - 1N4148 Diode
D1 - 1N4148 Diode
(see Figure D)
Note: R1 is not used.
Modular Jack (RJ-45)
(see Figure L)
J2 - F-Connector
Note: The connector must be
soldered in straight.
(see Figure K)
IMPORTANT: Cut off the
excess leads after soldering the
F-Connector to the PC board.