Technical data

The percent of difference between the measured value and the given color code value of the

4. e rmine if the resistor’s p ch of the

following conditions.

be sufficient if 11 volts were applied across the 1.2k resistor?

________________________________________________

r ting

be sufficient if 50 mA were flowing through the 150 resistor?

_ _____________________________________________

er ting be sufficient if 350 volts were applied across the 300k resistor?

__________________________________________________________

f difference In tolerance (yes/no)

resistor is 3.5%. Therefore the 1k resistor is operating within its 5% tolerance.

Complete the table below. Use an ohmmeter to measure each resistor. Refer to the example

above to calculate if each resistor is operating within its tolerance rating.

Resistor measures? % o

270k - 2 watt

6.2k - 1 watt

11 - 1/2 watt

2k - 1/2 watt

2.2k - 1/2 watt

300k - 1/2 watt

Use Ohm’s Law to d te ower rating would be sufficient in ea

Would the power rating

__________

Would the powe ra

___________ _

Would the pow

750k - 1/2 watt

10M - 1/2 watt

150 - 1/4 watt

5.6k - 1/4 watt

1.2k - 1/8 watt

39k - 1/8 watt