0 YEAR MANUFACTURER'S LIMITED WARRANTY Al parts of this Elements of Design faucet are warranted fo the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges landlord damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
Need Tools: INSTALLATION INSTRUCTIONS Ce For Use With OD's Twin Handles Faucet with or without Pop-Up Basin Wrench ~~ Adjustable Wrench ~~ Teflon Tape Silicone Sealant ~~ Screwdriver BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. Washer Lockout 1. Shut off hot and cold wale supply under 2. Insert the inlet shanks through the sink 7. Place pivot rod into pivot rod opening, 8.
Parts: Replacement Parts: Hot Carl ridge KSRPL2D0DHC Cold Cartridge: KSRPL2000CC Hot Handle: KBH1601 PXH Cold Handle: KBH18D1 PXC CARE AND MAINTENANCE OF YOUR FAUCET Your Elements of Design faucet has been finished lo he mast strict standards; however, due to the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ts to maintain the luster on your faucet for many years to come. Do 1. Use a silicon based caulking when installing. 2.
