0 YEAR MANUFACTURER'S LIMITED WARRANTY All parts of this Elements of Design faucet are warranted fo the original retail purchaser to be free from defects in material and workmanship for a period of Ten(10) years from the date of purchase as shown on the purchaser's receipt This warranty is limited to defective parts only, labor charges landlord damage resulting from improper installation, repair or replacements, as well as incidental and consequential damages connected therewith are excluded.
Need Tools: INSTALLATION INSTRUCTIONS ep Ee For Use With OD's Twin Handles Lavatory Faucet FF Ly, pe with or without Pop-Up Basin Wrench ~~ Adjustable Wrench ~~ Teflon Tape Silicone Sealant ~~ Screwdriver BEFORE BEGINNING INSTALLATION 1. Flush plumbing lines to clear any debris. 2. Shut off both supply lines after flushing. Shut off hot and cold water supply under 2 Insert the inlet shanks through the sink 7. Guide the pivot rod through one of the 8. With lift rod in position on tha faucet, insert sink.
Parts: Replacement Parts: g Cartridge: KERP101C & Hot Handle: KBHE01PXH & Cal Handle: KBHED1 PXC CARE AND MAINTENANCE OF YOUR FAUCET Your Elements of Design faucet has hen finished to he mast strict standards; however, due to the high content of minerals in the water, your finish may appear dull and famished after time. These are some do's and don'ls to maintain the luster on your faucet for many years ta come. Do 1. Use a silicon based caulking when installing.
