Operation Manual
36
causing property damage, personal injury, or loss of life. Service and installation must be performed by a trained/experienced service
technician.
WHAT TO DO IF YOU SMELL GAS
local codes, or in the absence of local codes, in accordance with the National Fuel Gas Code ANSI Z223.1/NFPA 54 or the IFGC or
CSA B149.1. All piping and tubing must comply with local codes and ordinances.
Use only your hand to push in or turn the gas control knobs. Never use tools. If a knob will not push in or turn by hand, do not try to
a product if you suspect it has been under water or that liquid has seeped into the product. Any of these incidents can cause leakage
or other damage that may affect proper operation and cause potentially dangerous combustion problems.
Damper position must be in accordance with Manufacturer’s Installation Instructions and all applicable standards. Failure to follow them
WARNING
WARNING
ELECTRIC SHOCK HAZARD
be performed by a trained, experienced service technician.
use the control if you suspect it may be damaged.
IMPORTANT SAFETY INFORMATION
UK