User Manual

Fault Code
Fault Description
High temp. alert
In refrigerator mode, if the inside temperature is over 59°F(15°C) for 36 hours, then the
high temperature alert is activated with the blue point blink and buzzing for 10 seconds,
and it will buzz for 10 seconds every 30 minutes.
If the temperature reach below 54
°F(12°C), the High Temperature Alert will exit.
Or press any button to cancel this alert.
In freezer mode, if the inside temperature is over 18
°F(-8°C) for 36 hours, then the
high temperature alert is activated with the blue point blink and buzzing for 10 seconds,
and it will buzz for 10 seconds every 30 minutes.
If the te
mperature reach below 10
°F(-12°C) , the High Temperature Alert will exit.
Or press any but
ton to cancel this alert.
Lock
Press B for 3
seconds, enter into lock status, icon is on with a beep. Then press it for another
3 seconds to unlock it, icon is off with a beep.
Temp
Press to drop the temperature. Press to rise the Temperature.
Reset
Press B and at the same time for 3 seconds until a beep for mainboard reset. Then all the
variables of mainboard will be initialized (except the variables stored in the EEPROM display). The
display will be fully lighted for 3 seconds just like the freezer is powered on for the first time. While
resetting, if the compressor is running, it will pause for 5 minutes then run again.
Recommended setting: Refrigerated chamber 4°C(39°F), freezing chamber -18°C(-0.4°F).
Please contact the after-sales service department of the company or professionals to deal
with the faults.
Communication error
Temperature sensor failure
of freezing chamber
Failure of ambient temperature
sensor
Failure of defrosting sensor in
freezing chamber