FCC Statement Base
Base Installation Instructions 1. 2. 3. 4. Lay a cloth or other soft material on a flat table to avoid damage to the LCD screen. Put the TV back upward and the LCD screen downward and keep it flat on the surface. Take out the base and insert it into the installing slot in the lower part of the TV until all of the holes match each other. Fasten the base and the TV set together with the 4 screws provided.
AC Input. Please refer to the "Locating TV buttons and connectors" to determine which inputs are available on your TV.
TV TV
CCD: Closed caption decoder function Electronic Program Guide (EPG) function: After pressing the "GUIDE" buttonin the digital TV channel option, the 4 same color buttons will appear with explanations in the OSD. Follow the steps illustrated in the OSD.
1. Dispose of your batteries in a designated disposal area. Do not throw batteries into a fire. 2. Do not mix battery types or combine used batteries with new ones. 3. Remove dead batteries immediately to prevent batter acid from leaking into the battery compartment. 4. If you do not use the remote control for a long time, remove the batteries. 315inches 236inches its place.
progra progra
Press the Menu button to display the main menu.
Adjust the overall color of the picture. Select to reduce the noise level of connected equipment: Off/Low/Standard/ and strong.
ELCHW402
