User Manual

supply tubing connection
Plastic water supply tubing fixed
11
Water valve and plastic water
□ Grasp the other end of the plastic tube and push it firmly
into the quick connection on the valve until it bottoms
out.
12
□ Clean the back of the cabinet with a commercial household
cleaner, ammonia, or alcohol before applying the clamps.
Secure the plastic water supply tubing to the back of the
cabinet with three plastic clamps.
11
9
□
10
Fixed water valve
Connect the wiring harness to the
water valve
□Locate the pre-punched holes at the bottom right corner
of the back panel of the refrigerator. Align the water valve
bracket with the factory drilled holes, then use a Phillips
head screwdriver to drive the two self-drilling screws
through the bracket and into the cabinet.
Installation Instructions - ( Bottom mount freezer )
Connect the wiring harness to the water valve, making
sure that the connection is tight, then install the mounting
box and box cover on the plug.