User Manual

Reinstall the drawers and

freezer compartment door

□ Reinstall the freezer door guide rail and replace the

freezer drawers, then place the ice storage bin in the

top freezer drawer.

Remove the label and then remove

the foam

□ Peel the label off the water hole on the back of your

refrigerator.

□ Remove the water tube connector, silicone seal, long water

supply tube, and white head screw from the accessory bag,

then assemble the parts by aligning the notch on the silicone

seal with the notch on the water tube connector, inserting one

end of the water supply tube into the quick change sealing ring

at the bottom of the connector. Make sure that all parts are

securely assembled. Insert the water supply assembly into the

water inlet hole on the back of your refrigerator, and secure it

with the long screw from the accessory bag.

Remove the thermal insulation

foam strip

Fixed Sealed silica gel block and

water pipe joint

□ Use needle nose pliers to remove the thermal insulation

foam strip from the hole you just exposed.

Installation Instructions - ( Bottom mount freezer )