Model: 32LE30Q UM No.
CAUTION: To reduce fhe dskof eleclric shock, do not remove cover or back. No user- serviceable parrs insTde. Refer ServTdng fo qualified service personnel. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could avoid the users' authority to operate this equipment. CAUTION: The TV shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the TV.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS INSIDE THE ENCLOSURE. QUALIFIED PERSONNEL WARNING: THE APPARATUS SPLASHING HIGH VOLTAGES ARE PRESENT DO NOT OPEN THE CABINET. REFER SERVICING TO ONLY. SHALL NOT BE EXPOSED TO DRIPPING OR AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES SHALL BE PLACED ON THE APPARATUS. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT IN OUTLET.
1. READ THESE INSTRUCTIONS. 10. 2. KEEP THESE INSTRUCTIONS. 3. HEED ALL WARNINGS. CONVENIENCE 4. FOLLOW ALL INSTRUCTIONS. WHERE THEY EXIT FROM THE APPARATUS. 5. DO NOT USE THIS APPARATUS ON OR PINCHED NEAR WATER. 11. 6. kitchen sink or laundry tub, in a wet PARTICULARLY RECEPTACLES, AT PLUGS, AND THE POINT ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED BY THE MANUFACTURER. Do not use this TV near water.
Thefrontofthedisplay panelhasbeenspecially treated. Wipethepanelsurface gently usingonlya cleaning clothorasoft,lint-free cloth. If thesurface is particularly dirty,soaka soft,lint-free clothina weakdetergent solution andthenremove excess liquid. Usethisclothtowipethesurface ofthedisplay panel, andthenwipeitwitha drycloth,of the same type,untilthesurface isdry. Donotscratch orhitthesurface ofthepanel withfingernails orotherhardobjects.
Tableof contents CAUTION AND WARNING ........................................................................ IMPORTANT SAFETY CLEANING SAFETY AND INSTRUCTIONS MAINTENANCE PRECAUTIONS ........................................................ ................................................................. ............................................................................. INSTALLATION ..........................................................................................
SafetyPrecautions ,_WARNING KEEP UNNEEDED SMALL PARTS AND OTHER OBJECTS OUT OF THE REACH OF SMALL CHILDREN. THESE OBJECTS CAN BE ACCIDENTALLY BE CAREFUL ABOUT PACKAGING SWALLOWED. ALSO, MATERIALS AND PLASTIC SHEETS. Set up Do not place the TV set on sloped or unstable surfaces. Do not place any objects on top of the TV set. If water spills onto the TV set or foreign objects get inside it, short-circuiting may occur which could result in fire or electric shock.
SafetyPrecautions When using the TV set Do not bring your hands, face or objects close to the ventilation holes of the TV set. Top of the TV set is usually very hot due to the high temperature of exhaust air being released through the Ventilation holes. Burns or personal injuries can happen if any body parts are brought too close. Placing any object near the top of the TV could also result in heat damage to the object as well as to the TV if its ventilation Be sure to disconnect holes are blocked.
Preparationfor usingyour newTV- FrontPanel Familiarizing Yourself with the Main Hardware (The picture of the product may vary depending a. on the model) Select signal input. (It changes ...... g to "ENTER" b. Main Menu display c. Channel up d. Channel down e. Volume up f. Volume down g.
Preparationfor usingyour newTV- RearPanel Rear panel (The picture of the product may vary depending on the model) 8:8 HDMI Input S-Video Input - Input1 :J - Video M - Input2 :K - Audio D, D1 Component Input 1 - Video: El, - Audio: Component VGA input F1, G1 B, B1 Input 2 - Video I - Audio H (3.
Preparationfor usingyour newTV - Connections 1. Checking Items before Connecting Please check the list below before connecting < Check > items before connecting. Check the instruction buttons manual external to other devices. devices. External products sometimes have different and locations. A. Do not connect damaged 2. when connecting the product the power unless every connection if turned B. Connect C.
Usingthe remotecontrol- Learningaboutremotecontrol 1. POWER: Power on/off. 2. SLEEP: Press to select a preset time interval to automatically ® ® ® shut the TV. 3. ASPECT: Press to adjust the screen size. 4. DISPLAY: Press to Check your current mode. 5. MTS: Press to select your favorite language in digital broadcasting. 6. DTV: Press to change between Analog TV and Digital TV. 7. FAV: Add/delete the current channel to your favorite channel. @ @ 8. FAV.
Usingthe remotecontrol- Remotecontrolinstructions < Inserting the batteries into the remote 1. Push the back of the remote 2. Pull forward 3. Insert two AAA 1.5V batteries. 4. Ensure the correct polarity (+/-). 5. Close the lid. control > control. slightly. CAUTION: Use only Alkaline Batteries.
Basicoperation- ChoosingTV Channel TURN ON LCD TV 1. Connect the AC input cable to power to the LCD TV. At this time the TV will enter standby mode and indicator show red. 2. User POWER button or 3. Wait 5 second after switch off LCD TV then you can turn on LCD TV again. 1. 2. button on the remote control. Using the CH + / CH - on the front panel or on the remote control. • Press CH + to increase channel number. • Press CH - to decrease channel number.
Basicoperation- Selectinginputsource You can select the input source by pressing the INPUT on the remote control or on the side panel. iN P U T Me n u 1. Press VOL+/- to adjust the volume. 2. If you want to switch the sound OFF, press the MUTE. 3. You can cancel the mute function by pressing MUTE or VOL+/-.
Setupmenuoperation-Adjust the OSDscreen Press the MENU button to display the main menu. Use _ / b. / A / v buttons to select and adjust the available menus. T 1 NOTE: The OSD (On Screen Display) function until it provides graphical enables you to adjust the screen status conveniently presentation. When the cursor stays on a main menu function ENTER or _ button to activate it.
Setupmenuoperation- ScreenLanguage& PictureMenuOption NOTE: If you use your LCD TV for the first time, you should select the language for displaying which will be used menus and indications. 1. Press MENU to display the main menu. 2. Press • 3. Use ,L / v and ENTER to select MENU LANGUAGE. 4. Press ENTER button to select your desired language. / v repeatedly to select the SETUP MENU. NOTE: In this manual, the OSD (On Screen Display) may be different from your TV's in colors.
Setupmenuoperation- Audio menuoptions Contrast Press ENTER button to select it and then use ,4 / _, to adjust the contrast of picture. Brightness Press ENTER button to select it and then use ,4 / _, to adjust the brightness of picture. Sharpness Press ENTER button to select it and then use ,4 / _, to adjust the sharpness level of picture. Color Press ENTER button to select it and then use ,i / _, to adjust the color saturation.
Setupmenuoperation- Setupmenuoptions Audio Language Press ENTER to one of the audio language such as English / French and Spain, but the condition is that the program system has included the language code. Bass Press ENTER button to select it and then use <. / i_ to increase or decrease the level of the lower-pitched sounds, Treble Press ENTER button to select it and then use ,q. / D, to increase or decrease the level of the higher-pitched sounds.
Setupmenuoperation- Setupmenuoptions Auto Ch Search Press ,L / v to move the cursor to the item to be selected (item selected highlighted enter your selection and scan. After the scan is finished, the following in yellow). Press ENTER key to menu will display. The channels found the automatically saved as below: Note: If you want you exit the Auto Ch Search during the Auto search process, press MENU twice to exit.
Setupmenuoperation- Featuremenuoptions Menu Language To select language of the OSD such as English/French and Spain. Reset Press ENTER to return to the factory setting. Press MENU on the front panel or on the remote control and then use A / v to select the FEATURE menu 1. Use A / v to select what you want to adjust in the FEATURE menu. 2. Press ENTER button to select it and then use _. / _ to adjust. 3. When you are satisfied with your adjustment, press MENU to exit the main menu.
Setupmenuoperation- Featuremenuoptions Sleep Timer Press ENTER button to select it and then use < press the ENTER that can select the 15'/30' / _ to select the amount of time before your TV turn off automatically / 45' / 60'/90' / 120'/180'/240' and and OFF. Advance Video Menu Press ENTER to enter the advance video menu as below • Noise Reduction - Spatial: press 4 • Noise Reduction -Speaker :press 4 / _ • Noise Reduction-Temporal: / _. to select on or off.
Setupmenuoperation- Featuremenuoptions Note: Advanced Rating is only available in digital channel. US Ratings Press ENTER to enter the US Ratings as below MPAA Press ENTER to lock or unlock one of None/G/PG/PG-13/R/NC-17 and X. • None: No restrictions • G: General Audience. This contains little or no violence, no strong language, and little or no sexual dialog or situations. • PG: Children under 13 should be accompanied by an adult. • PG-13: Parental guidance suggested.
Setupmenuoperation- Featuremenuoptions • TV-V7: Directed for older children. Themes and elements in this program may include mild physical or comedic violence, or may frighten children under the age of seven. • TV-Y: All children. The themes and elements in this program are specifically designed for a very young audience, including children from ages two six.
Setupmenuoperation- Featuremenuoptions Advanced Parental Lock When select the ON for Advance Rating, the Advanced Digital Closed Parental Lock will display. Captions This menu allows you to set the closed caption, and press ENTER to enter Closed Caption Options menu as below: • Style: press ,q / _ to select between Automatic and Custom, when you select automatic, the other options are disable and can not be adjusted. • Size: press ,4 / _ to select between Normal/Large • Font: press ,4 / _.
Setupmenuoperation- VGAmenuoptions Continuously Press [INPUT] on the remote control until coming VGA on the top-right screen. 1. Use A / T to select what you want to adjust in the FEATURE menu. 2. Press ENTER button to select it and then use ,t. / _ to adjust. 3. When you are satisfied with your adjustment, press MENU to exit the main menu.
Setupmenuoperation-YPBPR menuoptions screen size also will change. Position- This function is to adjust the picture to Left/Right and Up/Down as you prefer. Auto Adjust Press ENTER button to select it and then use ,t / D, to do auto adjust that automatically adjusts the available options for the best viewing configuration. Setting Press ENTER to do preset that can return to the factory setting. Continuously Press [INPUT] on the remote control until coming "Component" on the top-right screen.
Setupmenuoperation- HDMImenuoptions Continuously Press [INPUT] on the remote control until coming "Component" on the top-right screen. 1. Use A / v to select what you want to adjust in the FEATURE menu. 2. Press ENTER button to select and then use ,4. / =, to adjust. 3. When you are satisfied with your adjustment, press MENU to exit the main menu. Time Set Press A / v button and then use ENTER the time set menu that allows you to set the time the TV will display.
Appendix-Tr0ublesh00ting Identifying Problems If there are any problems using the product, please first consult the list below. If the list below does not solve the problem, call our Customer Service Center immediately. Q: My television won't power on. What could be wrong? A: Make sure your power cord is firmly plugged into both the back of the TV and the power outlet. Some models have a power switch on the back of the TV - make sure it is in the ON position.
Appendix-Tr0ublesh00ting Q: I opened the box and an accessory was missing. What do I do? A: Please call our Customer Service team so we can get you a replacement. Go to the "Contact Us" portion of the web site and enter your model number to obtain the correct customer support phone number. Q: Why am I getting a black square in the center of my television screen? A: The Closed Caption function is set in the "text" mode.
Appendix-Troubleshooting wide field of view in the theater. Scope is much wider than your widescreen TV, so it still requires the use of tetterboxing ("black bars") to fit the entire image on screen. Some TVs and DVD players have a zoom function that allows you to blow up the image so it fills the screen, but the sides of the image must be cropped in order to do so. Q: My TV is making a buzzing/humming noise.
Appendix-Removing TV Stand If you decide to install the wall mount your LCD TV, always use a VESA standard wall mount appropriate for the size and weight of the LCD TV. CAUTION • Be sure to follow TV falling • Before • Unplug the instructions. Incorrect installation of the stand/wall mount may result in the over. attaching (or detaching) and remove the stand, any cables and/or unplug the AC cord from the AC input terminal. other component connectors from the rear of the TV.
Appendix-WallMountingUnit Specification Unit Dimension(unit: mm) Screw Diameter 400x200 M5 Remark: The specification NOTE: instructions mm) 12 of screw is just used on the back cabinet.
Appendix-Universal RemoteControlCode List For Universal Universal Remote Remote Control Control brands listed below, please use accompanying User Manual for basic instruction for changing codes and refer to your TV code to operate TV model.
Appendix-TVSpecification Model 32LE30Q Diagonal display size 32 inches Television system American TV standard ATSC/NTSC Audio multiplex BTSC system VHF: 2~13 Channel coverage UHF: 14~69 system CATV:1~125 Digital Terrestrial Broadcast (8VSB): 2~69 Digital cable (64/256 QAM): 1~135 PC mode YPbPr/YCbCr 640x480/60Hz, mode 800x600/60Hz, 1024x768/60Hz 480i/60Hz, 480p/60Hz, 720p/60Hz, 1080i/60Hz HDMI Mode 480i/60Hz, 480p/60Hz, 720p/60Hz, 1080i/60Hz Resolution 1366x768 Power source AC 100 -
