02 33.664760, -117.676533 Associated Electrics, Inc. 21062 Bake Parkway. Lake Forest, CA 92630 Customer Service Tel: 949.544.7500 Fax: 949.544.7501 Follow Us On Social Media ElementRC @Element_RC www.ElementRC.com AE is a Registered Trademark of Associated Electrics, Inc. TEAM ASSOCIATED is a Registered Trademark of Associated Electrics, Inc. REEDY is a Registered Trademark of Associated Electrics, Inc. INTRODUCTION Thank you for purchasing this Element RC product.
03 33.664760, -117.676533 HARDWARE 1:1 SCALE VIEW FLAT HEAD SCREWS (FHCS) HARDWARE USED WITH OPTIONAL REPLACEMENT PART NUMBERS BUTTON HEAD SCREWS (BHCS) 2.5x10mm (31350) 2.5x10mm (41088) 2.
04 33.664760, -117.
05 YOUR BUILD BEGINS HERE.
06 GATE 01 ELECTRONIC MOUNTS BUILD: BAG 3 71050 x2 25203 x4 Hook and Loop Straps 3x12mm FHCS 42003 x1 Battery Box, Shorty Pack GATE 02 ELECTRONIC MOUNTS BUILD: BAG 3 x1 25225 x4 41090 3x10mm LP SHCS 6338 x1 Antenna Tube and Cap Servo x1 ESC x1 *Not Included 42215 x1 x1 Receiver *Not Included *Not Included x1 25211 3x3mm Set Screw 3x10mm BHCS Servo Horn 25T 6727 x2 Servo Tape K C LO AD 6 RE 59 TH #1 *Not Included GATE 01 GEARBOX BUILD: BAG 4 x1 42028 BLACK GREASE #6588 BL A
07 33.664760, -117.
08 GATE 01 FRONT AXLE BUILD: BAG 5 41086 x4 2.5x16mm SHCS 91560 x2 5x10x4mm Bearing 91474 x2 7x14x3.
09 33.664760, -117.676533 GATE 02 REAR AXLE BUILD: BAG 6 71032 x2 2.
GATE 03 LINKS BUILD: BAG 7 41078 x1 BLACK GREASE #6588 x2 42040 Rod End, Curved 3x28mm, BHCS E AS RE K G588 C A BL #6 x1 42043 25188 x1 Link, 93mm x2 42041 3x20mm, BHCS NOTE: Check the rod end angles before installation Pivot Ball, 6mm 122.00mm x1 42054 25215 x2 FT Pivot Ball, Steel, 6mm M3 Locknut, Black GATE 04 LINKS BUILD: BAG 7 x2 42041 Pivot Ball, 6mm BLACK GREASE #6588 x1 42043 Steering Link x2 42040 Rod End, Straight 25187 x2 SE EA GR 8 CK 58 A BL #6 3x14mm, BHCS 154.
33.664760, -117.676533 GATE 06 LINKS BUILD: BAG 7 89233 x2 GREASE BLACK 588 #6 3x24mm FHCS x1 42043 Link, 73mm x2 42041 Pivot Ball, 6mm NOTE: Build and install two rear upper links E EAS GR CK 88 BLA #65 x2 42040 Rod End, Curved NOTE: Check the rod end angles before installation 102.
GATE 09 LINKS BUILD: BAG 7 42253 x1 x2 25187 3x14mm, BHCS Bumper Mount, Rear 89202 x2 3x12mm BHCS 89202 x4 3x12mm BHCS 25215 x2 M3 Locknut, Black GATE 10 LINKS BUILD: BAG 7 NOTE: Build and install two rear trailing arms x1 42250 Trailing Arm, Right 25188 x1 3x20mm BHCS x1 42250 Trailing Arm, Left x1 25215 M3 Locknut, Black 2308 x1 x4 42041 Pivot Ball, 6mm GATE 01 x1 25189 3x18mm BHCS 3x22mm, BHCS DRIVE SHAFT BUILD: BAG 8 x2 42021 Drive Shaft Pin, 2x11mm x1 42020 Drive Shaf
33.664760, -117.676533 GATE 02 DRIVESHAFT BUILD: BAG 8 NOTE: Make sure the screw pins are aligned with each female CVA during assembly NOTE: Make sure the phasing of the drive shafts is correct when installing them to the axles and gearbox.
GATE 02 SHOCK BUILD: BAG 9 Shock Bleeding Steps: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Pull shock shaft down. Fill shock body 3/4 full with shock fluid. Slowly move the shock shaft up and down to remove air from under piston. Wait for bubbles to come to surface. Fill shock body to top with silicone fluid. Place a drop of oil in the cap and on cap threads. Install cap and tighten completely. Slowly compress shaft all the way to the top.
33.664760, -117.676533 GATE 01 CAGE BUILD: BAG 10 x2 89203 3x16mm BHCS 31532 x2 3x8mm BHCS 42270 x1 Fuel Cell, Bottom 42270 x1 Cage, Rear, Right 42270 x1 Fuel Cell, Support 42270 x1 31531 x2 Cage, Rear, Left 3x6mm BHCS GATE 02 89202 x2 3x12mm BHCS CAGE BUILD: BAG 10 x2 31520 25211 x4 3x10mm BHCS 2.
YOUR BUILD BEGINS HERE. GATE 04 CAGE BUILD: BAG 10 89203 x1 3x16mm, BHCS x1 25211 3x10mm BHCS 42270 x1 Cage, Support Bar x1 89203 x3 89203 3x16mm BHCS 3x16mm BHCS x1 89202 3x12mm BHCS x4 89203 3x16mm BHCS x1 89203 3x16mm BHCS x4 89203 3x16mm BHCS 89203 x1 3x16mm, BHCS x1 89202 3x12mm BHCS 25211 x1 x3 89203 3x10mm, BHCS GATE 05 3x16mm BHCS CAGE BUILD: BAG 10 42270 x1 Cage, Rear x2 25188 3x20mm BHCS x4 89203 3x16mm BHCS x12 31520 2.
33.664760, -117.676533 GATE 06 CAGE BUILD: BAG 10 42270 x2 Body Post, Cage 31520 x8 2.
Shocks 5407 6299 31392 42040 42041 42054 42055 42056 42079 42080 42081 42082 42083 42085 42086 42087 42088 42089 42090 42091 O-Rings, Red, Silicone E-Clipp, 1/8” 3x5x0.
33.664760, -117.676533 Motor Mount 1336 9654 25201 25225 25391 31530 41090 42023 42029 18T 48P Aluminum Pinion Spur Gear, 87T, 48P M3x8mm FHCS M3x3mm Set Screw FT M4 Locknuts, Blue M3x5mm BHCS M3x10mm LP SHCS Stealth X Gearbox (Case, Gear cover, Spur Gear Hubs) Stealth X (Motor Plate) 1 1 10 10 10 10 10 1 31530 25391 9654 42023 42023 42023 1 31530 25201 41090 42029 25225 1336 Transmission 31350 41077 41078 42023 42025 42026 42027 42028 42030 42031 42032 91560 91563 M2.5x10mm FHCS M2.
ARB 2308 25187 25189 25215 42041 42054 42056 42250 42252 42260 89202 M3x18mm BHCS M3x14mm BHCS M3x22mm BHCS M3 Locknut Enduro Pivot Balls Set FT Enduro Pivot Balls, Steel FT Enduro Pivot Balls, Steel, Set (28) Gatekeeper Traililng Arms Gatekeeper Anti-Roll Bar Set Gatekeeper Shims M3x12mm BHCS 42252 10 10 10 10 1 10 1 1 1 4 ea.
33.664760, -117.676533 Front Axle 25187 25211 25215 25225 41078 41086 42019 42060 42061 42062 42064 42065 42066 42067 42069 42076 42070 71032 91474 91560 91563 M3x14mm BHCS M3x10mm BHCS M3 Locknut M3x3mm Set Screw M3x28mm BHCS M2.
YOUR BUILD BEGINS HERE.
33.664760, -117.676533 Roll Cage Sides 25211 31531 31532 42270 89202 89203 M3x10mm BHCS M3x6mm BHCS M3x8mm BHCS Gatekeeper Cage M3x12mm BHCS M3x16mm BHCS 10 10 10 1 10 10 89203 42270 42270 89202 31532 89203 89203 89202 89203 89203 89203 25211 89203 Body Panels 31520 41089 42271 42272 M2.
Wheel/Tire 25391 41088 42100 42101 42102 42103 42104 42105 42106 42107 42108 42109 42110 42111 FT M4 Locknuts, Blue M2.6x10mm Enduro Method 701 Trail Series Wheel, 1.9” Bronze Enduro Method 701 Trail Series Wheel, 1.9” Black FT Enduro Beadlock Rings, Brass FT Enduro Beadlock Hex Adapter, Aluminum FT Enduro Beadlock Hex Adapter, Brass FT Tire Insert, 1.9” General Grabber X3 Tire w/Inserts, (1.9x4.65” DIA) General Grabber A/T X Tires w/Inserts, (1.55x3.85” DIA) Enduro The Ocho Wheels, 1.
33.664760, -117.676533 SHOCK FLUIDS 5420 5421 5422 5423 5424 5425 5426 5427 5428 5429 5430 5431 5432 5433 5434 5435 5436 5437 5438 10 Weight Silicone Shock Fluid 20 Weight Silicone Shock Fluid 30 Weight Silicone Shock Fluid 40 Weight Silicone Shock Fluid 22.5 Weight Silicone Shock Fluid 80 Weight Silicone Shock Fluid 27.
REEDY ELECTRONICS REEDY BATTERIES / CHARGERS 27424 27430 27431 27432 27433 27434 27461 MOTORS Reedy Radon2 Crawler 16T 5-Slot 1850kV Brushed Motor Reedy Crawler 540 16T 5-Slot RTR Brushed Motor Reedy Radon2 Crawler 12T 5-Slot 2700kV Brushed Motor Reedy Radon2 Crawler 20T 5-Slot 1500kV Brushed Motor Reedy Radon 2 Brush/Spring Set Reedy Radon 2 Wire Set Reedy Crawler 550 14T 5-Slot RTR Brushed Motor 1 1 1 1 1 1 1 27011 27034 COMPETITION ESC’s (SPEED CONTROLLERS) Reedy SC480X Brushed Crawler ESC Reed
33.664760, -117.
GATE 01 STEALTH X: BUILD CONFIGURATION: MOTOR MOUNT FACING REAR (STOCK) OVERDRIVE: Overdrive is a scenario where the front and rear wheels do not rotate at the same speed. The Stealth X gearbox is designed to allow the front wheels to spin faster than the rear wheels. Overdrive is advantageouse when climbing up rock faces because the front tires will want to pull the vehicle up the rock.
33.664760, -117.676533 TRAIL TIPS AND CHECKLIST PREPARING TO HIT THE TRAIL: When preparing to hit the trail, it’s a good idea to have a checklist to make sure you have everything and don’t end up having to head back early. We’ve compiled a checklist of the things we think you’ll need on the trail. We’ve also left some space for you to add your specific items to the list. Keep in mind these are suggestions and every person will require different items.
ElementRC @Element_RC
