User Manual

Cable
Use High Quality Cat5e UTP or Cat6 UTP Cable (Terminated T568-B Format). Cat6 Is
Recommended For Distances Over 30m. Distance May Vary Based On Different HDMI
Equipment & Cable Quality.
page 2
Transmission Distance
Resolution / Cable Distance
1. 1080p / CAT5e 25M
2. 1080p / CAT6 30M
3. 1080i, 720p / CAT5e 35M
Transmitter LED Functionality
Blue On Power On
Blue Flash TV EDID Backup Complete
Green On Sending Power or Video to Rx Unit
Yellow On No Data Input or Unsupported Video Format
DIP Switch Function
1 UP Use the default EDID
1 DOWN Use the backup TV EDID
2 UP Select the first default EDID (1080i, 2CH)
2 DOWN Select the second default EDID (1080p, 5.1CH)
Default EDID Setup
1. Move DIP Switch 1 off (up).
2. Move DIP Switch 2 off (up) for option 1, supports 1080i / LPCM 2 Channel.
3. Move DIP Switch 2 on (down) for option 2, supports 1080p / LPCM 5.1 Channel.
External EDID Setup
1. Move DIP Switch 1 on (down) & unplug.
2. Connect Tx to TV using HDMI cable for auto backup.
3. Reconnect power to complete TV EDID backup, Blue LED will keep fashing.
4. Reset power on Tx to activate new EDID.