Owner Manual

19
enance
Grill Burner:
1. Remove grill lid, regulator kit and
cast iron grate.
2. Remove the 2 wing screws holding
burner to grill body. See 1). and 2).
Grill Burner Flame Height:
The factory burner has been set for
the correct air and gas mixture.
The correct flame pattern:
1: Burner tube
2: Tips occasionally flicker yellow
3: Light blue
4: Dark blue
If flames do not appear to be uniform
throughout the burner tube, check if
the ventilation openings of the burner
tube are blocked by dirt, debris,
spider webs, etc. In order for burner
to work properly there must be no
obstructing the flow of combustion or
ventilation air. Proceed with cleaning
instructions below.
FIG.09.
Grill Burner Exterior Cleaning:
Clean the exterior of the burner with a wire brush. Clean stubborn scale with a metal
scraper. Clear any clogged ports with a straightened paper clip. FIG.11.
Never use a wooden toothpick as it may break off and clog the port. Shake out any debris. Use
a flashlight to inspect the burner inlet to ensure it is not blocked. FIG.11.
If obstructions can be seen, use a metal wire coat hanger that has been straightened out.
Check and clean burner/venture tube for insects and insect nests. A clogged tube can lead to a
fire beneath the grill.
FIG.10.