User Manual

14. SETTINGS MENU
69
INPUT FROM selects the source Syntakt will receive MIDI data from.
• DISABLED will make Syntakt disregard any incoming MIDI data.
• MIDI will make Syntakt listen only to MIDI data sent to the MIDI IN port.
• USB will make Syntakt listen only to MIDI data sent to the USB port.
• MIDI+USB will make Syntakt listen to MIDI data sent to both the MIDI IN and USB ports.
OUTPUT TO selects the destination to which Syntakt will send MIDI data.
• DISABLED will stop Syntakt from sending out any MIDI data.
• MIDI will make Syntakt send MIDI data to the MIDI OUT port only.
• USB will make Syntakt send MIDI data to the USB port only.
• MIDI+USB will make Syntakt send MIDI data to both the MIDI OUT and USB ports.
If MIDI+USB is selected in the OUTPUT TO settings, MIDI data will limit the USB speed.
When sending large chunks of data, make sure you only use the USB setting.
OUTPUT CH selects whether the knobs will send data on the auto channel or the track channel.
PARAM OUTPUT selects what type of MIDI messages the DATA ENTRY knobs will send. For information
about which CC/NRPN parameters that will be sent, please see “APPENDIX B: MIDI” on page 102.
• NRPN will make the knobs send out NRPN MIDI messages.
• CC will make the knobs send out CC MIDI messages.
ENCODER DEST controls whether the DATA ENTRY and LEVEL/DATA knobs sends MIDI data or not.
When set to INT, the knobs only aects the Syntakt and no MIDI data is sent. When set to INT + EXT, the
knobs aects the Syntakt and also sends MIDI data to external devices.
TRIG KEY DEST controls whether the [TRIG] keys sends MIDI data or not. When set to INT, the [TRIG]
keys only aects the Syntakt and no MIDI data is sent. When set to INT + EXT, the [TRIG] keys aects
the Syntakt, and also sends MIDI data to external devices. When set to EXT, the [TRIG] keys do not
aect the Syntakt but MIDI data is sent externally.
MUTE DEST controls whether activating/deactivating mutes will send MIDI data or not. When set to INT,
mute only aects the Syntakt and no MIDI data is sent. When set to INT + EXT, mute aects the Syntakt
and also send MIDI data to external devices. When set to EXT, mute sends MIDI data externally, but do
not aect the Syntakt.
RECEIVE NOTES will, when active, make it possible to play Syntakt using an external MIDI keyboard.
RECEIVE CC/NRPN will, when active make it possible to control Syntakt parameters from an external
MIDI device sending CC/NRPN data.
14.2.3 CHANNELS
This menu handles the MIDI channel configuration.
TRACK 1–12 selects the dedicated MIDI channel that is used to receive or send (by turning the knobs)
parameter data to or from a specific audio/MIDI track. If configured as OFF, parameter data are nei-
ther received nor sent via MIDI.
FX CONTROL CH selects the dedicated MIDI channel that is used to receive or send (by turning the
knobs) parameter data to or from the FX track and the DELAY and REVERB parameter pages. If con-
figured as OFF, parameter data are neither received nor sent via MIDI.
The sequencer data is always sent on the MIDI channel specified by the CHAN
parameter on the SYN PARAMETER page if the track has a MIDI machine assigned.