User Manual

12. FX TRACK PARAMETERS
60
TIME
AMPLITUDE
Note On
Attack
Decay
Sustain
Note O
Release
Env.
Delay
12.5 FLTR PAGE 2
On FILTER page 2, you will find the parameters that control the envelope delay parameter. Press [FLTR]
twice to access this parameter page.
12.5.1 DEL
Envelope delay sets the time before the attack phase of the filter envelope starts. This parameter is part
of the filter envelope that controls the multimode filter. You can also press and hold [FUNC] and then
turn DATA ENTRY knob A to quickly access this parameter from FILTER page 1.
12.6 AMP PAGE 1
The AMP page 1 controls parameters for the inverted amplitude envelope, eects sends, panning and
volume.
Press [AMP] to access this parameter page.
12.6.1 ATK
Attack Time sets the length of the attack phase of the amp envelope.
12.6.2 HOLD
Hold Time sets the length of the hold phase of the amp envelope. Fixed Hold time values (0–126) specify
the length of the hold phase, and the envelope ignores Note O events such as Trig Length, releasing a
[TRIG] key or a key on an external controller. Setting HOLD to NOTE means the hold phase will be deter-
mined by Note On and Note O events.
If you set HOLD to NOTE and use an external keyboard to trigger the envelope, then the
sound will be sustained (if DEP is set to less than 127) for as long as you press a key on the
keyboard.
12.6.3 DEC
Decay Time sets the length of the decay phase of the amp envelope.