User Manual

8. PATTERNS AND SOUNDS
30
OCTAVE
Sets the base octave of the Sound. It also makes Sound locking more practical since you can control
the octave setting on the Sound and minimize the need to transpose the sequencer notes to make
two or more Sounds work together.
PITCH BEND
Opens a menu where you can assign up to four PARAMETER page parameters to the pitch bend. The
pitch bend from incoming MIDI sent to the Syntakt from external devices aects the assigned param-
eters. Press [YES] to open the menu.
You can select parameters from the SYN, FLTR, AMP, and LFO PARAMETER pages. Turn the DATA
ENTRY knobs A–D to select the track parameters that you wish to assign. Press [YES] to confirm the
selection. Then use DATA ENTRY knobs E–H to set the modulation depth of the four track parame-
ters. The depth is an oset of the original track parameter value.
Turn LEVEL/DATA to test your settings.
VELOCITY MOD
Opens a menu where you can assign up to four PARAMETER page parameters to the velocity pa-
rameter. Both the VEL parameter on the TRIG menu and the velocity of incoming MIDI notes sent to
the Syntakt from external devices aects the assigned parameters. Press [YES] to open the menu.
Selecting parameters and setting modulation depth works in the same way as for PITCH BEND.
Turn LEVEL/DATA to test your settings.
MOD WHEEL
Opens a menu where you can assign up to four PARAMETER page parameters to the MIDI mod wheel
command (CC #1). Press [YES] to open the menu. Selecting parameters and setting modulation depth
works in the same way as for PITCH BEND.
Turn LEVEL/DATA to test your settings.
BREATH CONTROLLER
Opens a menu where you can assign up to four PARAMETER page parameters to the MIDI breath
controller command (CC #2). Press [YES] to open the menu. Selecting parameters and setting modu-
lation depth works in the same way as for PITCH BEND.
Turn LEVEL/DATA to test your settings.
AFTERTOUCH
Opens a menu where you can assign up to four PARAMETER page parameters to the MIDI aftertouch
command. Press [YES] to open the menu. Selecting parameters and setting modulation depth works
in the same way as for PITCH BEND.
Turn LEVEL/DATA to test your settings.
8.6.2 SOUND BROWSER