User Manual

3. PANEL LAYOUT AND CONNECTORS
13
• [FLTR] accesses the FILTER page. Here are the parameters for the multimode filter for the audio tracks.
On MIDI tracks you find the CC value settings here. The secondary function accesses the DELAY page.
• [AMP] takes you to the AMP page, where you find parameters for the amplitude envelope and eect
sends. On MIDI tracks you find the CC select settings here. The secondary function accesses the
REVERB page.
• [LFO] accesses the LFO parameters for the active track. The secondary function accesses the
MIXER pages.
11. The [ARROW] keys. Used for navigation and for setting some parameter values. In menus, they are
called [UP], [DOWN], [LEFT], and [RIGHT]. The secondary function for [UP] and [DOWN], accesses
the MODIFIER SETUP menu.
12. [PAGE] selects the active pattern page in GRID RECORDING mode, if the pattern is made up of more
than 16 steps. The <PATTERN PAGE> LEDs indicate how many pattern pages the active pattern
consists of and which pattern page is currently active. The LED flashes on the pattern page currently
playing. The secondary function accesses the SCALE menu. This key also activates FILL mode (when
GRID RECORDING mode is not active).
13. [TRIG] keys are used for entering or removing sequencer trigs, and parameter locks, in combination
with the DATA ENTRY knobs. They are also used to select a track, bank, and pattern, in combination
with the [TRK], [PTN], and [BANK] keys. The [TRIG 13–16] keys are also used to trigger modifier set-
tings. The [TRIG] keys are also used as a keyboard in KEYBOARD mode. The secondary function for
the [TRIG 1–12] keys is to Quick Mute tracks. The secondary function for the [TRIG 13–16] keys selects
modifier.
The [TRIG] keys LEDs indicate trigs on the sequencer by lit red keys, while flashing red or yellow keys
indicates parameter locks, in GRID RECORDING and STEP RECORDING mode. When a pattern plays,
or LIVE RECORDING is enabled, a light “runs” along the 16 steps of the sequencer across all (up to four)
pages at the set tempo.
14. [BANK] selects bank A–H in combination with the [TRIG 9–16] keys. The secondary function accesses
the MUTE mode.
15. [PTN] selects pattern 1–16 in combination with the [TRIG 1–16] keys. The secondary function opens the
METRONOME menu.
16. [STOP] stops playback. The secondary function is the paste operation.
17. [PLAY] starts the sequencer playback. Pressing [PLAY] a second time pauses playback. The secondary
function is the clear operation.
18. [RECORD] key. Activates/deactivates GRID RECORDING mode. Press [RECORD] + [PLAY], to activate
LIVE RECORDING mode. Press [RECORD] + [STOP], to activate STEP RECORDING mode. The sec-
ondary function is the copy operation.
19. [TRK] key. Press [TRK] + one of the [TRIG] keys to select a track for editing. The secondary function
accesses the KEYBOARD mode.
20. [FUNC] key. Press, hold and press another key to access the secondary function of that key. The sec-
ondary functions are written in red on the Syntakt front panel.
21. LEVEL/DATA sets the overall volume level of the active track. It is also used for setting parameters and
scrolling through lists. The secondary function opens the SOUND BROWSER.