User Manual

TRACK RECORDERS AND PICKUP MACHINES

LOOP sets whether the captured sample will loop or not when played.

• If a source is set t o “-” and you t ry to s ample from it, only sile nce will be re corded.

RECORDING SETUP 2 MENU

Enter RECORDING SETUP 2 menu by pressing [FUNCTION] + [AUDIO REC CD].

FIN applies a fade in when starting the recording. The value is expressed in sequencer

steps. Applying a very short fade in can be used to avoid clicks that otherwise might occur

when a record ed sam p le loo ps.

FOUT applies a fa de out to the re cord ing. The value is expressed in sequencer ste p s. The

fade out is added after the recording stops. If for example recording occurs for 16 steps and

FOUT is set to 2, the total length of the sample will be 18 sequencer step s. This pa rameter

behaves differently for Pickup machines. In this scenario the fade out will be applied to the

beginning of the captured loop.

AB sets the monitoring leve l of the signal coming fr om the input pair AB. T he setting is only

relevant when a Pickup machine is assigned to the track. The INAB sett ing, located in the

RECORDING SETUP 1 page, decides which input or inputs that should be monitored. If

different track recorders contain different AB settings, the setting made for the track

recorder of active track is the one that will dictate the current Pickup machine monitoring

level. The monitor signal is routed to the active track, meaning any track effect s will affect

the signal. It will also be routed to the output destination of the active track. This setting is

useful if you want to monitor incoming audio a Pickup machine should sample, but don’t

want to use DIR parameter of the MIXER m en u.

QREC makes it possible to time quantize manual sampling and Pickup machine sampling.

• OFF disables recording quantization.

• PLEN will, after pressing the keys initiating recording, start the recording process

once the pattern has played its full length.

• 1... will time the start of the samp lin g pr oc ess acco rd in g to th e set num b er of

sequencer steps. If for example 4 is selected, sampling will start on the next beat. If

8 is selected, sampling will start after half a bar.

QPL makes it possible to quantize manual trigging of the recorder buffers and Pickup

machines. Manual trigging is done by for example pressing [TRACK] + [PLAY] or the last

eight [TRIG] keys. This parameter has no effect on track recorders trigged by the

sequencer. This parameter is a reflection of the QUANTIZED TRIG setting available in the

ATTRIBUTES menu found in the audio editor. If the QPL parameter is changed, QUAN-

TIZED TRIG will thus be changed as well, which can be seen when the recorder buffer of