User Manual

QUICK START

PLEASE MOUNT ONE.” may appear. Press [ENTER/YES] and the menu where sets

are mounted and created will automatically be opened. Otherwise, proceed to step 2.

2. Press [FUNCTION] + [MIXER] to open the PROJECT menu. Select PROJECT and

press [ENTER/YES] or the [RIGHT] arrow key. Scroll down the list and select CHANGE,

located in the SET section.

3. Press [ENTER/YES] to open the menu where sets are mounted and created. If you are

not working within an existing project a window asking “NOT WITHIN A PROJECT.

CHANGES MADE WILL BE DISCARDED. CONTINUE?” will appear. Press [ENTER/

YES] to proceed with the mounting of the set. Note that any changes you have made will

be discarded. If you want to save the chan ges to a ne w project, use the SAVE TO NEW

command found in the PROJECT menu. Pressing [EXIT/NO] will cancel the set mount-

ing operation.

4. If you are using the Compact Flash card that came with the unit, select “PRESETS” and

press [ENTER/YES]. If you are using an empty Compact Flash card a set needs to be

created. Select <CREATE NEW SET> and press [ENTER/YES]. Name the set by using

the [ARROW] keys and when done pr ess [ENTER/YES]. Select the set in the list and

press [ENTER/YES]. A set has now been mounted.

• Af ter a set has been mounte d the menu where projects are loaded is automatically

opened.

LOADING A PROJECT

After a set has been mounted a project should be loaded. The Compact Flash card that

came shipped with the unit cont ai ns one proj ect, nam ed “PRESETS”. Thi s project co nta ins

16 demo patterns. If an empty Compact Flash is used the newly creat ed set will not contain

any projects and a project should therefore be create d. Read more about projects in sec-

tion “PROJECTS” on page 25.