User Manual

Appendix B: EFFECTS REFERENCE B-15
DARK REVERB
The dark reverb provides lush, wide stereo reverberation with long decay times. It is good for adding a
spacey ambience to a sound.
DARK REVERB MAIN
TIME sets the decay time of the reverberated
signal.
SHVG affe ct s the damping o f the reverber ated
signal above the shelving fre quency set by the
SHVF parameter. At max value treble is
included in the reverberations, lowering the
value gradually dampens it.
SHVF controls the frequency of the shelving fil-
ter inside the reverb erator. Together with the
SHVG parameter it can be used to dampen the
reverberated signal above a chosen frequency,
making the reverberation sound darker.
HP controls the cutoff frequency of the high
pass filter affecting the incoming signal.
LP controls the cutoff frequency of the low
pass filter affecting the incoming signal.
MIX adjusts the mix between the origin a l dry
signal and the reverber ated signal. When
MIXF of the DARK REVERB SETUP page is
set to SEND, the MIX parameter works simi-
larly to an aux send knob of a mixer.
DARK REVERB SETUP
PRE adjusts the length of a short delay befor e
the signal reaches the reverberator.
BAL sets the balance betwee n the left/right
channel of the re ve rb er at ed sign al.
MONO continuously adjusts the width of the
reverberated signal from stereo to mono.
MIXF defines the functionality of the MIX con-
trol of the DARK REVERB MAIN page to be
either MIX or SEND.