User Manual

OCTATRACK TUTORIALS
138
with the knob A. A good position would be right before the downbeat. Press [FUNC-
TION] + [ENTER/YES] to preview the sample from the start point.
6. Press [PLAY] to start the sequencer of the Octatrack.
7. Press [TEMPO] to open the TEMPO menu. Turn the LEVEL knob to adjust the tempo.
Once the sample loops seamlessly you know that this BPM is the original tempo of the
sample.
8. Exit the TEMPO menu by pressing [EXIT/NO]. Press [EFFECT 1] to open the ATTRIB-
UTES menu in th e audio ed itor. Select ORIGINAL TEMPO and set it to the c urrent Oct a-
track BPM. Depending on the character of the sample, make su re TIMESTRETCH is set
to either NORMAL or BEATS.
9. Press [EXIT/NO] to exit the audio editor. In the PLAYBACK SETUP menu, set TSTR to
AUTO. No matter the BPM of the Octatrack sequencer, the loop will now be time
stretched or time compressed accordingly and thus stay in sync.
• To permanentely link the st ar t point and ORIGINAL TEMPO sett ings to the sample,
use the SAVE SAMPLE SETTINGS command found in the FILE menu.
THE OCTATRACK AS A DJ DECK
The Octatrack can function as a complete DJ setup, eliminating the need for both DJ decks
and a DJ mixer.
1. Connect a pair of headph ones to the Octatrack headphones output.
2. Double press [TRACK 1] to open the QUICK ASSIGN menu. Assign a Static machine
to track 1. Press [TRACK 5] and assign a S t atic machine to track 5. This makes it easier
to remember where the different tracks you are going to mix between are located. The
left block of tracks could be said to represent one DJ deck and the right track block
another. Make sure none of the tracks contain any trigs.