User Manual

OCTATRACK TUTORIALS
132
SAMPLING USING RECORDER TRIGS
The use of recorder trigs offers a considerably more powerful method of sampling. They
offer automated sampling. To use recorder trigs when sampling, please follow these steps.
1. If you are sampling from the external inputs, make sure audio from an exter nal device is
being sent to th e Octatrack input s. The <AUDIO RECORD> LEDs indicate the strength
of the signal sent to the inputs. If you hear sound but see no LED activity, try increasing
the volume of the e xternal audio by either increasing the GAIN parameter in the MIXER
menu or by increasing the volume on the external device itself. If you don’t hear any
sound, make sure the DIR parameter in the MIXER menu is not set to zero.
2. Select the track whose recorder you want to use by pressing the relevant [TRACK] but-
ton.
3. Open up the RECORD SETUP 1 menu by pressing [FUNCTION] + [AUDIO RECORD
AB] buttons.
4. Select from which source or sources the recorder should sample from by setting INAB,
INCD and SRC3 as needed. If needed, make RLEN and TRIG settings.
5. Make sure GRID RECORDING mode is active. If not, press [REC] to activate it. Place
out a recorder trig by pressing a [TRIG] button. Note that the sequencer while in the
RECORD SETUP menus only reflects recorder trigs.
A recorder trig defaults to sampling from all input sources. When in the RECORDING
SETUP 1 menu, the source a recorder trig samples from can be seen by pressing the
[TRIG] key of the recorder trig. The activated sources are indicated by inverted graphics
in the LCD and by lit <AUDIO RECORD> and <MIDI> LEDs. Deactivate a recording
source by pres sin g [TRIG] + [AUDIO RECORD AB]/[AUDIO RECORD CD]/[MIDI].
6. Press [PLAY] to start the playback of the sequencer . Once a record trig has been trigged
by the sequencer the track recorder will start to sample.
• Recorder trigs ca n be tur ned in to one shot record er trigs. Th ey trig s ampling only
once, which can be very useful when fo r example sampling live and not wanting t o
have to remove a recorder trig once it has initiated sampling. One shot recorder
trigs are entered by pressing [FUNCTION] + [TRIG] and are indicated by yellow
<TRIG> LEDs. Read more about one shot recorder trigs in section “RECORDER
TRIG SAMPLING” on page 53.
PLAYBACK OF CAPTURED RECORDER SAMPLES
The samples captured by the track recorders are stored in the recorder buffers located in
the Flex sample slot list. A sample located in a recorder buffer functions just like a Flex
sample.
1. To assign a recorder buff er to a track, follow the in structions how to assign a sample to a
machine covered in section “ASSIGNING FLEX AND STATIC SAMPLES TO
MACHINES” on pag e 66. The eight recorder buffers are located abo ve the first Flex
sample in the Flex sample slot list. Press the [UP] arrow key to access them.