User Manual

PATTERNS

holding the [TRIG] key of the trig you want to micro edit, then press either the left or right

[ARROW] button.

TRIG COUNT sets the nu mber of times the sample trig sho uld be re peated. Ad just this set-

ting with the up and down [ARROW] keys.

TRIG OFFSET controls where the trig should be pl aced on the 1/384 step re solution m icro

timing grid. Move th e trig on the gri d by pressing the lef t and righ t [ARROW] buttons. A trig

can be nudged both forwards and backwards in time in relation to the step it is placed on.

• If a trig placed on the first sequencer step is nudged backwards, it will be acti-

vated at the end of the pattern.

• Setting the tempo to 2x in the SCALE SETUP menu will double the resolution of

the micro timing grid.

• Micro timed trigs can be quantized in the TRACK TRIG EDIT menu. Read more on

page 87.

SCALE SETUP

Here the gene ral length and timing of a p att ern is set. Access the SCAL E SETUP menu b y

pressing [FUNCTION] + [PATTERN PAGE]. This menu will look different depending on

whether NORMAL or PER TRACK is active. These settings are made in the PATTERN

SETTINGS menu. Read more on page 89. Use the [LEFT] and [RIGHT] arrow keys to

select betwee n th e ava ila ble setting s. The [UP] and [DOWN] arrow keys or the LEVEL

knob adjust the settings.

NORMAL

This is the default mode. In this mode all tracks of th e pattern hav e the same length and

time signature. This screen will appear when the NORMAL setting, foun d in the PATTERN

SETTINGS menu, is active for all tracks.

PATTERN SCALE sets the number of steps in a pattern and thus the total amount of pat-

tern p ages. T he leftmost nu mbe r se lects the number of steps in the pattern. The maximum

number of steps availabl e to the pattern is determined by the total length, set by the right-

most parameter . This can be either 16, 32, 48 or 64 steps. If 17 steps or more are used in a