User Manual

PATTERNS

the sequencer. When pressing and holding a recorder trig, the so urce or sources the

recorder trig samples from are indicated by lit <AUDIO RECORD> and <MIDI> LEDs.

This is an alternative way of placing recorder trigs compared to the RECORDING SETUP

menu method. Read more about recorder trigs in section “RECORDER TRIG SAMPLING”

on page 53.

• Just like in the RECORDING SETUP menus, recorder trigs can in the TRACK TRIG

EDIT menu be assigned to dif ferent s ampling s ources. Keep a [ TRIG] ke y pres sed

and depending on the source you wish to sample from either press [AUDIO REC

AB], [AUDIO REC CD] or [MIDI]. The different sampling sources are covered in

section “TRACK RECORDERS AND PICKUP MACHINES” on page 47.

PATTERN SETTINGS MENU

This menu is opened by pressing [FUNCTION] + [BANK] when GRID RECORDING mode

is not active. Here settings relating to how the tracks of the active pattern shou ld behave

are found.

Each pattern can have unique settings and the active pattern is visible in the

header of the menu

. The settings and choices of th e main alternatives are accessed by

selecting a main alternative and pressing the [RIGHT] arrow key.

PATTERN

Contains settings related to the patterns. Change the various settings by selecting them and

either pressing

[ENTER/YES] or turning the LEVEL knob.

SCALE MODE NORMAL is the default setting. In this mode all tracks of the pattern share

the same length an d time signature. S tep leng th and time signature settings are chan ged in

the SCALE SETUP menu, which is covered on pag e 92.