User Manual

11. SETTINGS MENU

11.4.1 HP MAX

The parameter sets the limit of the Headphones volume. This setting is useful if you want to have dier-

ent volume settings for MAIN out and HEADPHONES OUT, for example to protect your ears and your

headphones if you want to turn up the MAIN OUT volume really loud. You can see the HP MAX setting as

a little headphones symbol when you turn the MAIN VOLUME knob.

11.4.2 INT OUT

Sets if Model:Samples sends audio to the MAIN OUT and HEADPHONES OUT or not.

OFF sends no audio.

AUT sends audio unless you are sending and receiving audio over USB. If so, the Model:Samples

detects this and sends no audio to MAIN OUT and HEADPHONES OUT.

ON sends audio.

11.4.3 TRK OUT

Sets if the separate tracks sends audio to the MAIN OUT and HEADPHONES OUT or not. Use the [T1–

T6] pads to toggle the tracks on and o.

11.4.4 DEL OUT

Sets if the delay eect sends audio to the MAIN OUT and HEADPHONES OUT or not.

11.4.5 REV OUT

Sets if the reverb eect sends audio to the MAIN OUT and HEADPHONES OUT or not.

11.5 BACKUP

Here you can send the current project or pattern data via the MIDI OUT/THRU port or the USB port of the

Model:Samples in SysEx format to a receiving device for backup.

When or sending or receiving SysEx data, the MIDI ports or the USB port of the Model:Samples should be

connected to the external sending/receiving device.

If the external device is a computer, we recommend using our free SysEx utility C6, which you can down-

load from the Elektron website.

11.5.1 SENDING BACKUP PROJECT/PATTERN DATA

Press LEVEL/DATA to initiate SysEx data transfer of the current project. Use LEVEL/DATA to select if

you want to send project or pattern data.

Before initiating a SysEx send, ﬁrst, make sure the receiving device is listening for data.

11.5.2 RECEIVING BACKUP DATA

Model:Samples is continuously listening for SysEx data so you can at any time send backed up projects

or patterns to the device.