User Manual

11. SETTINGS MENU

PCH OUT will, when set to ON, make Model:Samples send program change messages when the

sequencer changes patterns. You set the MIDI channel for the program change messages in the MIDI

CHANNELS menu. For more information, please see “11.3.3 OUT CHAN” on page 38.

11.3.2 IN CHAN

This menu handles the MIDI input channel conﬁguration. Use LEVEL/DATA to browse and change the

settings.

T1–6 IN selects the dedicated MIDI channel that is used to receive parameter data to a speciﬁc track. If

conﬁgured as OFF, parameter data are not received via MIDI.

FX IN selects the dedicated MIDI channel for the DELAY and REVERB parameters, If conﬁgured as

OFF, parameter data are not received via MIDI.

AUTO IN selects the MIDI channel for the AUTO channel that gives access to the currently active

track. If an external MIDI keyboard connected to Model:Samples sends MIDI data on this channel,

the keyboard controls the active track. This is useful when for example quickly changing between the

active audio tracks to play dierent Sounds.

The Model:Sample uses the Tracks dedicated channels and the AUTO channel to record

to the sequencer tracks from external MIDI keyboards and controllers.

PCH IN selects the MIDI channel that listens for incoming program change messages. An AUTO set-

ting uses the AUTO channel. Enable Model:Samples to respond to program change messages in the

SYNC menu. For more information, please see “11.3.1 SYNC” on page 37.

11.3.3 OUT CHAN

This menu handles the MIDI output channel conﬁguration. Use LEVEL/DATA to browse and change the

settings.

T1–6 OUT selects the dedicated MIDI channel that is used to send (by turning the knobs) parameter

data from a speciﬁc track. If conﬁgured as OFF, parameter data are not sent via MIDI.

A track must be set to send MIDI data to send MIDI data using the TRACK PARAMETER

and FX knobs. For more information, please see “8.4.2 MOUT” on page 23.

FX OUT selects the dedicated MIDI channel for the DELAY and REVERB parameters, If conﬁgured as

OFF, parameter data are not sent via MIDI.

PCH OUT selects the MIDI channel that sends program change messages when changing patterns.

Enable Model:Samples to send program change messages in the SYNC menu. For more information,

please see “11.3.1 SYNC” on page 37.

11.3.4 PORTS

Here you ﬁnd the MIDI port-related settings. Use LEVEL/DATA to browse and change the settings.