User Manual

10. FX PARAMETERS
35
10. FX PARAMETERS
In this chapter we will have a look at the Model:Samples eect parameters.
10.1 REVERB
The Reverb send eect controls the persistence, and ambient characteristics, of the sound reverberations.
It can simulate many dierent sonic locations, from huge spaces to small rooms.
10.1.1 REVERB SIZE
Sets the length of the decay time of the reverberated signal, essentially setting the size of the acoustic
space. (1–127, INF)
10.3.2 REV TONE
Reverb Tone changes the tone of the reverb by dampening either the low frequencies or the high fre-
quencies of the reverberated signal. The parameter is bipolar. Positive values dampen the low frequen-
cies. Negative values dampen the high frequencies. (-64–63)
10.2 DELAY
The Delay send eect takes the input signal, delays it in time and then blends it with the original signal.
10.2.1 DELAY TIME
Delay Time sets the delay time. It is relative to the current BPM and measured in 128th notes.
(1.00–128.00)
TIME setting Divide ratio
1 1/128
2 1/64
3 1/64.
4 1/32
6 1/32.
8 1/16
12 1/16.
16 1/8
24 1/8.
32 1/4
48 1/4.
64 1/2
96 1/2.
128 1
10.2.2 DEL FEEDBACK
Delay Feedback sets the amount of delay output signal to feed back into the input of the delay. With
higher parameter settings, infinite and/or swelling delays are possible. Please be aware that high feed-
back can lead to a very loud signal. (0–198)