User Manual
8. THE SEQUENCER
27
Adding parameter locks in GRID RECORDING mode:
1. Press [RECORD] to enter GRID RECORDING mode.
2. Press [TRIG] or [FUNC] + [TRIG] key to add a Note trig or a Lock trig and to where you want to
perform a parameter lock.
3. Press and hold the [TRIG] key of a previously placed trig (note trig or a lock trig) and then use the
PARAMETER knobs to adjust the parameters you want to lock.
The graphics become inverted for the locked parameter, and the locked parameter values are dis-
played. The [TRIG] key starts to quickly flash red to indicate that the trig now contains a parameter
lock. Also, the LED next to the PARAMETER knobs lights up red to indicate the parameter now has
a parameter lock assigned to it on that trig
4. Press and hold the [TRIG] key of a trig and then press [LOOP] or [REVERSE] to parameter lock
these functions on a trig.
5. Press and hold the [TRIG] key of a trig and then turn LEVEL/DATA to open the TRIG NOTE menu.
Use LEVEL/DATA to change the NOTE and VEL settings.
Removing a specific parameter lock on a trig in GRID RECORDING mode:
1. Press and hold the [TRIG] key that contains a parameter lock.
2. Turn the PARAMETER knob corresponding to the parameter from which you want to remove the
parameter lock.
3. Press [PLAY] to clear the parameter lock.
4. Press and hold the [TRIG] key that contains a LOOP or REVERSE parameter lock, and then press
[LOOP] or [REVERSE] to remove these parameter locks.
5. Press and hold the [TRIG] key that contains a NOTE parameter lock, and then turn LEVEL/DATA to
open the TRIG NOTE menu. Press LEVEL/DATA to clear the parameter lock.
6. Press and hold the [TRIG] key that contains a VEL parameter lock, and then turn LEVEL/DATA to
open the VEL menu. Press [PLAY] to clear the parameter lock.
Removing all parameter locks on a trig in GRID RECORDING mode:
1. Press and hold the [TRIG] key that contains a parameter lock.
2. Press [PLAY] to clear the parameter locks.
You can also remove all parameter locks from a trig if you remove the note trig and then enter it again.
Adding parameter locks in LIVE RECORDING mode:
1. Press and hold [RECORD], then press [PLAY] to enter LIVE RECORDING mode.
2. Turn a PARAMETER knob or playing the [TRIG] keys, to input parameter locks to the active track.
Note trigs are locked accordingly, and lock trigs that contains the locks are placed on the sequenc-
er steps.
Removing all parameter locks on a trig in LIVE RECORDING mode:
1. Remove the note trig and then enter it again.
Up to 72 dierent parameters can be locked in a pattern. A parameter counts as one (1)
locked parameter no matter how many trigs that lock it. If for example the cuto parame-
ter of the filter is locked on every sequencer step, there are still 71 other parameters that
can be locked.
8.12.2 CONDITIONAL LOCKS
In GRID RECORDING mode, press and hold a [TRIG] key, and then turn CHANCE to open the TRIG
CONDITION menu.
Conditional locks are a specific kind of Parameter locks. Conditional locks give you the possibility to set
a number of conditional rules for any trig. These conditional rules are called Trig conditions. They are