User Manual

8. THE SEQUENCER
23
3. Press [PLAY] to exit LIVE RECORDING mode while keeping the sequencer playing. If LIVE RE-
CORDING mode is active and [RECORD] is pressed, GRID RECORDING mode will be activated.
4. Press [STOP] to stop both recording and playback of the sequencer.
You can use an external MIDI controller such as a keyboard to input NOTE and VELOCITY
data in LIVE RECORDING mode. Just play the notes on the external keyboard and they will
be recorded by the sequencer.
8.4 TRACK SETUP MENU
Use the TRACK SETUP menu for track-related settings. Press [FUNC] + [TRACK] to access the TRACK
SETUP menu. Press [TRACK] + [T1–6] to select the track to which you want to change the settings. Use
the LEVEL/DATA knob to navigate and change the parameter settings.
8.4.1 KBT
Keyboard Transpose sets the transpose value of the note range that the [TRIG] keys cover when you
use them to play the samples chromatically. The transpose range is -24–24 semi-tones.
8.4.2 MOUT
Will, when checked, send the tracks NOTE, VELOCITY, and TRIG LENGTH sequencer data to the Mod-
el:Samples MIDI OUT for control of external MIDI devices. The data are sent on the track’s MIDI channel
set in the CHANNELS menu. For more information, please see “11.3.3 OUT CHAN” on page 38.
If MOUT is checked the following functions also sends MIDI data:
• PADS The [T1–6] pads sends MIDI note data.
• TRIG KEYS The [TRIG] keys sends MIDI note data in CHROMATIC mode.
• MUTE, activating/deactivating mutes sends MIDI.
• TRACK PARAMETER and FX knobs sends MIDI data on their set channels.
• If MOUT is checked, the track sends the sequencer data both externally over MIDI and
internally to the tracks sample.
• Only the sequencer data for the NOTE, VEL, and LEN parameters are sent over MIDI. For
more information, please see “8.8 TRIG NOTE MENU” on page 25.
8.4.3 PAD
Defines the default note value of the trigs when pressing a pad. If the track is configured to send MIDI,
this is also the note value the pad sends via MIDI.
8.5 TRIG NUDGE MENU
Here you can add micro timing to a note trig, and nudge it ahead or behind the beat. Nudge can be custom-
ized on any of the sequencer steps on both audio and MIDI tracks.
1. In GRID RECORDING mode, press and hold one or several [TRIG] keys and then turn SWING to access
the TRIG NUDGE menu that shows the time oset for the chosen sequencer trig(s) on the active track.
2. Turn SWING clockwise or counter-clockwise to set the NUDGE value