User Manual

3. PANEL LAYOUT AND CONNECTORS

3.2 REAR CONNECTORS

3 4

5 6

1. DC IN, Input for power supply. Use the included PSU-4 power adapter, connected to a power outlet.

2. USB, For connecting the unit to a computer. Use the included USB A to Micro B connector cable to

connect to a computer host.

3. MIDI OUT/THRU, Use the included 3.5 mm (Tip/Ring/Sleeve) to female 5 pin DIN cable to connect – via

a standard MIDI cable – to MIDI IN of an external MIDI device or to another MIDI device in the chain.

4. MIDI IN, MIDI data input. Use the included 3.5 mm (Tip/Ring/Sleeve) to female 5 pin DIN cable to con-

nect – via a standard MIDI cable – to MIDI Out of an external MIDI device.

5. MAIN OUT R/L, Main audio outputs. Use either 1/4” mono phone plug (unbalanced connection) or

1/4” (Tip/Ring/Sleeve) phone plug (balanced connection).

6. HEADPHONES, Audio output for stereo headphones. Use 1/4” (Tip/Ring/Sleeve) phone plug.

3.3 SIDE CONNECTOR

1. BATTERY DC In, Input for accessory battery power supply.

3.4 SETTING UP AND STARTING THE MODEL:SAMPLES

Make sure you place the Model:Samples on a stable support, such as a sturdy table, with sucient space

for the cables. Make sure to switch o all devices before you connect the Model:Samples to other devices.

1. Plug the supplied DC adapter to a power outlet and connect the small plug to DC IN on the

Model:Samples.

2. Connect MAIN OUT R/L from the Model:Samples to your mixer/ampliﬁer or connect your headphones

to the Model:Samples HEADPHONES jack.

3. To control the Model:Samples from a computer, connect a USB cable between the computer and the

USB connector of the Model:Samples.

4. If you want to use MIDI to control the Model:Samples, connect the MIDI OUT port of the device you

wish to send data from to the MIDI IN port of the Model:Samples. If the MIDI OUT/THRU port is set to

function as THRU, it duplicates the data arriving at the MIDI IN port, so it can be used for chaining MIDI

units together. Connect the MIDI OUT/THRU port of the Model:Samples to the MIDI IN port of the of the

device you want to control if you want to use Model:Samples to control other devices. (Set the port to

function as OUT.)

5. Switch on all units. Press and hold MAIN VOLUME for a second to switch on the Model:Samples.