User Manual

3. PANEL LAYOUT AND CONNECTORS

3.1 FRONT PANEL

1. LEVEL/DATA sets the overall volume level of the active track. You also use it to set parameters and

navigating menus. The secondary function sets the track pan.

2. Screen.

3. [TEMPO]

opens the TEMPO menu, where you can adjust the global tempo. The secondary function

makes it possible to tap the tempo.

4. [WAVE]

opens the SAMPLE ASSIGN menu. The secondary function opens the SWING ALL menu.

5. [LOOP]

loops the sample of the active track. The secondary function opens the QUANTIZE menu.

6. [REVERSE]

reverses the sample of the active track. The secondary function opens the CLICK menu.

7. TRACK PARAMETER knobs are used for setting parameter values. Press and hold [FUNC], and then

turn the knobs to change values in larger increments.

8. MAIN VOLUME sets the volume for the main outputs and the headphones output. Press and hold MAIN

VOLUME to turn the unit on. Press and hold MAIN VOLUME until the countdown on the screen ﬁnishes

to turn the unit o. The unit will not turn o if you let go of the MAIN VOLUME during the countdown.

This is to prevent that you turn the unit o accidentally.

9. REVERB SIZE sets the size of the global reverb eect. The secondary function sets the reverb tone.

10. DELAY TIME sets the delay time of the global delay eect. The secondary function sets the delay

feedback.

11. [PAGE] selects the active pattern page, if the pattern is made up of more than 16 steps. The <PATTERN

PAGE> LEDs indicate how many pattern pages the active pattern consists of and which pattern page is

currently active. The LED ﬂashes on the pattern page currently playing. The secondary function access-

es the SCALE menu. This key also activates Fill mode (when GRID RECORDING mode is not active).

12. [TRIG] keys. Used for entering or removing sequencer trigs and parameter locks, in combination

with the TRACK PARAMETER knobs. They are also used to select patterns, in combination with the