User Manual
12 GLOBAL SETTINGS MENU
59
In MULTI MAP EDIT, Setting a specific SOUND SLOT and setting SOUND INC to 1
is convenient if you wish to define, for example, a succession of drum sounds that
you have stored in a given sound slot range to be mapped to a certain section of the
keyboard. Instant access to those snares, kicks, and hi-hats!
FIXED VEL will, if set to OFF, make the velocity sensitivity of the MIDI keyboard work as usual.
It may also be set to a constant specific value between 1 and 127, 1 being the lowest and 127 the
highest possible velocity.
DELETE ENTRY deletes the whole entry. Select and confirm by pressing [YES].
INSERT BEFORE will create a new entry with a range ending on the note preceding the current
entry. Select by pressing [YES].
INSERT AFTER will create a new entry with a range beginning on the note succeeding the current
entry. Select by pressing [YES].
• EXT.TRIG allows MIDI control of external equipment for a chosen keyboard key or range.
CHANNEL sets which specific MIDI channel on which the MIDI note messages are to be sent, or AUTO.
NOTE sets which note the start of the chosen keyboard range will play.
NOTE INC defines by what increment the subsequent notes played will increase.
FIXED VEL will, if set to OFF, make the velocity sensitivity of the MIDI keyboard work as usual. It
may also be set to a constant specific value between 1 and 127.
DELETE ENTRY deletes the whole entry. Select and reconfirm by pressing [YES].
INSERT BEFORE will create a new entry with a range ending on the note preceding the current
entry. Select by pressing [YES].
INSERT AFTER will create a new entry with a range beginning on the note succeeding the current
entry. Select by pressing [YES].
• NONE sets a keyboard key or range that will not be used for any function. Convenient for defining a
‘no-play’ zone on the keyboard between two or more sections with dierent Sounds or functions.
RANGE LOW sets the note on the keyboard on which to start the desired keyboard range.
RANGE HIGH sets the note on the keyboard on which to end the desired keyboard range.
DELETE ENTRY deletes the whole entry. Select and confirm by pressing [YES].
INSERT BEFORE will create a new entry with a range ending on the note preceding the current
entry. Select by pressing [YES].
INSERT AFTER will create a new entry with a range beginning on the note succeeding the current
entry. Select by pressing [YES].
• PAT.PLAY maps a chosen pattern to a specific MIDI keyboard key or range.
RANGE LOW sets the note on the keyboard on which to start the desired keyboard range.
RANGE HIGH sets the note on the keyboard on which to end the desired keyboard range.
PATTERN selects which pattern A01 - H16 of the active project will be played when pressing a key-
board key in the range specified above. Set to CUR if the current pattern is to be played.
PATTERN INC selects the increment with which the pattern will increase for each successive key
press in the specified range. For example, if set to 1, each successive key will start pattern A01,
A02, A03 and so on. Set to 2 it will play pattern A01, A03, A05 et cetera. Set to 0 if the same pat-
tern as set in PATTERN above is to be played for every key in the range.
TRANSPOSE transposes the pattern up or down 1-36 octaves. No transpose if set to 0.
TRANSPOSE INC sets the increment by which the transpose will be increased for each step of the
chosen keyboard range. No increase if set to 0.
CHG MODE sets the mode of starting the pattern. D.START starts the selected pattern directly
from its first step. D.JUMP starts the selected pattern on the step following the current sequencer
step. SEQ starts the pattern from its first step once the current pattern has reached its final step.
DELETE ENTRY deletes the whole entry. Select and confirm by pressing [YES].
INSERT BEFORE will create a new entry with a range ending on the note preceding the current
entry. Select by pressing [YES].
INSERT AFTER will create a new entry with a range beginning on the note succeeding the current
entry. Select by pressing [YES].