User Manual

10. THE SEQUENCER

10.12.7 NOTE SLIDE

The NOTE SLIDE menu makes it possible for the pitch of two separate note trigs to slide between each

other. Open the menu by pressing [FUNC] + [BANK G]. When this menu is active, and [TRIG] keys are

pressed, note slide trigs will be placed on the sequencer.

If a note slide trig is placed on the same step as a note trig, the pitch of the previous note trig will slide.

For instance, if a track contains two note trigs and a note slide trig is placed on the same step as the

second note trig, the pitch of the ﬁrst note trig will slide to the pitch of the second note trig. The speed

of the pitch slide is determined by the SLI parameter, found in the second page of the OSC2 menu. For

more information, please see “APPENDIX A: SYNTH TRACK PARAMETERS” on page 82.

Note slides can be quickly added to note trigs. Keep the note trig pressed and press

[BANK G]. A note slide trig will automatically be placed on the same sequencer step as the

note trig.

Press a note trig lock to quickly see if a note slide trig is placed on the same sequencer

step as the trig. If that is the case, the [BANK G] key will light up.

10.12.8 PARAMETER SLIDE

The PARAMETER SLIDE menu makes it possible for the parameter values of two separate note trigs or

lock trigs of a track to slide between each other. Open the menu by pressing [FUNC] + [BANK H]. When

this menu is active, and [TRIG] keys are pressed, slide trigs will be placed on the sequencer.

For a parameter value to slide between two trigs, it needs to be locked on one of the trigs. A locked pa-

rameter value will slide to the unlocked value and vice versa. To make the parameter value slide, place a

slide trig on the same sequencer step as the trig whose parameters you want to slide. The speed of the

slide is relative to the current tempo, and the slide is completed when the next trig is reached. Several

parameter values can slide at the same time.

Parameter slides can be quickly added to note trigs or lock trigs. Keep the note trig or lock

trig pressed and press [BANK H]. A parameter slide trig will automatically be placed on the

same sequencer step as the note trig/lock trig.

Press a note trig/lock trig to quickly see if a parameter slide trig is placed on the same

sequencer step as the trig. If that is the case, the <BANK H> key will light up.

10.12.9 SWING

Sets the swing of the pattern, allowing for a dierent rhythmic groove. Access this menu by pressing

[FUNC] + [PTN].