User Manual

10. THE SEQUENCER
40
10.4.1 NOTES SETUP
Contains settings mainly relating to track quantization and scale. It is the same menu as accessed by
pressing [FUNC] + [NOTE]. The NOTES SETUP menu is covered in section “NOTES SETUP” on page
35.
10.4.2 ARP SETUP
Contains settings for the track arpeggiators. It is the same menu as accessed by pressing [FUNC] +
[ARP]. For more information, please see “10.7 ARPEGGIATOR SETUP” on page 42.
10.4.3 RELOAD TRACK
Reloads the active track. Since tracks are a part of patterns which are automatically saved, it will either
be reloaded to its auto-saved state or a specific saved state set by the SAVE TRACK command. Remem-
ber that when you change pattern the track settings are saved automatically and will then overwrite the
SAVE TRACK saved state. Press [NO] + [TRK] for a shortcut to the RELOAD TRACK command.
10.4.4 SAVE TRACK
Saves changes made to the active track. This is a special feature available in addition to the general,
automatic, saving of patterns which occur when patterns are changed. The feature is useful in situations
where an individual track is being worked on, the results are favorable and you want to keep on working
with the track while having the ability to revert it to a specific saved state. The SAVE TRACK command
makes this possible. When reloading the track, it will not be reloaded to its original, pattern auto-saved,
state, but to the manually saved state. Press [YES] + [TRK] for a short cut to the SAVE TRACK com-
mand.
10.5 PATTERN MENU
In the PATTERN menu patterns can be saved and reloaded. Open the menu by pressing [PTN] Select be-
tween the available commands by using the [UP]/[DOWN] arrow keys. Confirm selections with [YES].
10.5.1 RELOAD PATTERN
Reload the active pattern. It will either be reloaded to its auto-saved state or a specific saved state set by
the SAVE PATTERN command. Press [NO] + [PTN] for a short cut to the RELOAD PATTERN command.
10.5.2 SAVE PATTERN
Saves changes made to the active pattern. This is a special feature available in addition to the general,
automatic, saving of patterns which occurs when patterns are changed. The feature is useful in situations
where a pattern is being worked on, the results are favorable, and you want to keep on working with the
pattern while having the ability to revert to a specific saved state. The SAVE PATTERN command makes
this possible. When reloading the pattern, it will not be reloaded to its original, auto-saved, state, but to
the manually saved state. Press [YES] + [PTN] for a short cut to the SAVE PATTERN command.
The RELOAD PATTERN command is great when improvising live. Any changes made to the
active pattern, like adding bass line notes or similar, can immediately be undone.
10.6 ARPEGGIATOR
The ARPEGGIATOR menu controls the six arpeggiators, one for each track. Arpeggiator settings are a part
of the pattern, and they are not stored together with kits. Select the track whose arpeggiator will be edited
by pressing the relevant [TRACK] key. Open the ARPEGGIATOR menu by pressing [ARP].