User Manual
Table Of Contents
- INTRODUCTION
- THE BACKGROUND OF THE ANALOG FOUR
- PANEL LAYOUT AND CONNECTORS
- ANALOG FOUR SIGNAL PATH
- OVERVIEW OF THE ANALOG FOUR STRUCTURE
- THE USER INTERFACE
- QUICK START
- KITS AND SOUNDS
- THE SEQUENCER
- CHAINS AND SONGS
- GLOBAL MENU
- EARLY STARTUP MENU
- TECHNICAL INFORMATION
- CREDITS AND CONTACT INFORMATION
- Appendix A: SYNTH TRACK PARAMETERS
- Appendix B: FX TRACK PARAMETERS
- Appendix C: CV TRACK PARAMETERS
- Appendix D: MIDI
- INDEX
GLOBAL MENU
40
• ALL SONGS will send all songs to the receiving device.
• ALL SETTINGS will send all global slots to the receiving device.
KIT
• ACTIVE KIT will send only the currently active kit to the receiving device.
• KIT 01-128 will send the selected kit to the receiving device.
SOUND will send the selected Sound to the receiving device.
PATTERN will send the selected Pattern to the receiving device.
SONG will send the selected Song to the receiving device.
GLOBAL will send the selected Global slot to the receiving device.
• Backing up your data regularly is important!
• Before initiating a SysEx send, first make sure the receiving device is listening for data to be sent.
SYSEX RECEIVE
Here kits, Sounds, patterns, songs and global slots can be received from an external device via the MIDI IN port
or the USB port of the Analog Four.
The column to the left selects what should be received. Select the column using the [LEFT] arrow key. Use the
[UP]/[DOWN] keys or the LEVEL knob to navigate in the column. The SysEx data receive alternatives located
in the column to the right will change depending on the selection made in the left column. Press the [RIGHT] arr-
row key to access this column. Use the [UP]/[DOWN] keys or the LEVEL knob to select what should be
received. Press [YES/SAVE] to initiate the SysEx receive procedure. The Analog Four will start listening to
incoming data. Press [NO/RELOAD] to stop listening.
KIT
• ACTIVE KIT will when receiving kit SysEx data replace currently active kit with the
received kit.
• KIT 01-128 will store a received kit to the selected kit slot
SOUND will store a received Sound to the selected Sound slot.
PATTERN will store a received pattern to the selected pattern slot.
SONG will store a received song to the selected song slot.
GLOBAL will store a received global to the selected global slot.