User Manual

GLOBAL MENU
37
• MIDI+USB will make the Analog Four listen to MIDI data sent to both the MIDI IN and
USB ports.
OUTPUT TO selects the destination to which the Analog Four will send MIDI data.
• DISABLED will stop the Analog Four from sending out any MIDI data.
• MIDI will make the Analog Four send MIDI data to the MIDI OUT port only.
• USB will make the Analog Four send MIDI data to the USB port only.
• MIDI+USB will make the Analog Four send MIDI data to both the MIDI OUT and USB
ports.
• If MIDI+USB is selected in the INPUT FROM and/or OUTPUT TO settings, MIDI data transfers might
limit the USB speed.
PARAM OUTPUT selects what type of MIDI messages the DATA ENTRY knobs should send.
For information about which CC/NRPN parameters that will be sent, please see “Appendix D:
MIDI“.
• OFF will stop the knobs from sending out any MIDI messages.
• NRPN will make the knobs send out NRPN MIDI messages.
• CC will make the knobs send out CC MIDI messages.
ENCODER CFG controls whether the DATA ENTRY and LEVEL knobs should send MIDI
data or not. When set to INT, no MIDI data will be sent.
KEYBOARD CFG controls whether the [KEYBOARD] keys should send MIDI note data or
not. When set to INT, no MIDI data will be sent.
RECEIVE NOTES will when active make it possible to play the Analog Four using an external
MIDI keyboard.
RECEIVE CC/NRPN will when active make it possible to control Analog Four parameters from
an external MIDI device sending CC/NRPN data.
MIDI CHANNELS
This menu handles the MIDI channel configuration.
AUTO CHANNEL selects the MIDI channel that should give access to the currently active
track. If an external MIDI keyboard connected to the Analog Four sends MIDI data on this
channel, the keyboard will control the active track. This is useful when for example quickly
changing between the active synth tracks to play different Sounds.
TRACK 1-4, FX, CV selects dedicated MIDI tracks that should control the synth, FX and CV
tracks. An OFF setting will make the track disregard any incoming MIDI messages.