User Manual
Table Of Contents
- INTRODUCTION
- THE BACKGROUND OF THE ANALOG FOUR
- PANEL LAYOUT AND CONNECTORS
- ANALOG FOUR SIGNAL PATH
- OVERVIEW OF THE ANALOG FOUR STRUCTURE
- THE USER INTERFACE
- QUICK START
- KITS AND SOUNDS
- THE SEQUENCER
- CHAINS AND SONGS
- GLOBAL MENU
- EARLY STARTUP MENU
- TECHNICAL INFORMATION
- CREDITS AND CONTACT INFORMATION
- Appendix A: SYNTH TRACK PARAMETERS
- Appendix B: FX TRACK PARAMETERS
- Appendix C: CV TRACK PARAMETERS
- Appendix D: MIDI
- INDEX
THE SEQUENCER
29
To quick save a song, press [YES/SAVE] + [KEYBOARD G1]. The command is the same as the SAVE com-
mand found in the SONG menu, covered on page 34.
To quick reload a kit, press [NO/RELOAD] + [KEYBOARD C1]. This command is the same as the RELOAD
KIT command found in the KIT menu, covered on page 12.
To quick reload a Sound, press [NO/RELOAD] + [KEYBOARD D1]. The PARAMETER page settings of the
active track will be reverted to their saved state. It is essentially the same as loading the Sound anew. The
LOAD TRACK SOUND command found in the SOUND menu, covered on page 15.
To quick reload a track, press [NO/RELOAD] + [KEYBOARD E1]. The operation is the same as the RELOAD
TRACK command, covered on page 29.
To quick reload a pattern, press [NO/RELOAD] + [KEYBOARD F1] will reload the active pattern. The operation
is the same as the RELOAD PATTERN command, covered on page 21.
To quick reload a song, press [NO/RELOAD] + [KEYBOARD G1]. The command is the same as the RELOAD
command found in the SONG menu, covered on page 34.
TRACK MENU
In this menu settings and options related to the active track are found. Open the menu by pressing [FUNCTION]
+ [KEYBOARD E1]. Navigate in the list using the [UP]/[DOWN] arrow keys or the LEVEL knob. Select options
by pressing [YES]. Change the track the menu should affect by pressing the [TRACK] keys.
NOTES SETUP contains settings mainly relating to track quantization and scale. It is the
same menu as accessed by pressing [FUNCTION] + [NOTE]. The NOTES SETUP menu is
covered in section “NOTES SETUP” on page 24.
ARP SETUP contains settings for the track arpeggiators. It is the same menu as accessed by
pressing [FUNCTION] + [ARP]. The ARPEGGIATOR SETUP menu is covered on page 23.
RELOAD TRACK will reload the active track. Since tracks are a part of patterns which are
automatically saved, it will either be reloaded to its original auto-saved state or to a specific
saved state which can be determined by utilizing the SAVE TRACK command. Press [NO/
RELOAD] + [KEYBOARD E1] for a short cut to the RELOAD TRACK command.
SAVE TRACK will save changes made to the active track. This is a special feature available
in addition to the general, automatic, saving of patterns which occurs when patterns are
changed. The feature is useful in situations where an individual track is being worked on, the
results are favorable and you want to keep on working with the track while having the ability to
revert it to a specific saved state. The SAVE TRACK command makes this possible. When
reloading the track, it will not be reloaded to its original, pattern auto-saved, state, but to the
manually saved state. Press [YES/SAVE] + [KEYBOARD E1] for a short cut to the SAVE
TRACK command.