User Manual
Table Of Contents
- INTRODUCTION
- THE BACKGROUND OF THE ANALOG FOUR
- PANEL LAYOUT AND CONNECTORS
- ANALOG FOUR SIGNAL PATH
- OVERVIEW OF THE ANALOG FOUR STRUCTURE
- THE USER INTERFACE
- QUICK START
- KITS AND SOUNDS
- THE SEQUENCER
- CHAINS AND SONGS
- GLOBAL MENU
- EARLY STARTUP MENU
- TECHNICAL INFORMATION
- CREDITS AND CONTACT INFORMATION
- Appendix A: SYNTH TRACK PARAMETERS
- Appendix B: FX TRACK PARAMETERS
- Appendix C: CV TRACK PARAMETERS
- Appendix D: MIDI
- INDEX
KITS AND SOUNDS
12
KITS AND SOUNDS
Kits and Sounds are the basic building blocks of the Analog Four. They contain information about the parameter
settings of the tracks. Kits can be regarded as a collection of Sounds as well as other settings. A Sound is
essentially a synth track patch. Sounds can be loaded to the synth tracks.
Kits and Sounds are separated, meaning kits does not necessarily have to use any saved Sounds. When saving
a kit, the PARAMETER page settings of the synth tracks, i.e. the settings that constitute a Sound, will be saved
together with the kit. The synth track PARAMETER page settings of a kit can of course be saved as individual
Sounds as well. When loading a Sound, it will become a part of the kit. Any changes made to the Sound will thus
not affect the loaded sound per se, but rather the kit.
A pattern, controlling the playback of the kit, is always linked to a kit. Changing patterns therefore means the kit
might be changed as well.
A Kit contains:
• Sounds loaded to the 4 synth tracks.
• FX track parameter settings.
• CV track parameter settings.
• LEVEL settings for the Synth and FX tracks.
• PERFORMANCE mode parameter settings.
A Sound contains:
• Settings for the PARAMETER pages of a synth track.
• The LCD graphics in the right part of the screen shows the currently active kit. When the [TRACK]
keys are pressed, this information will briefly change to reflect the name of the track. In the case
of the synth tracks, the name of the loaded Sound will be displayed.
KIT MENU
In the KIT menu commands relating to kits are found, most importantly kit save and load. Open the menu by
pressing [FUNCTION] + [KEYBOARD C1]. Use the [UP] and [DOWN] arrow keys to move between the com-
mands. Press [YES/SAVE] to confirm your selection. Exit the menu by pressing [NO/RELOAD].
RELOAD KIT will reload the kit, reverting it to its saved status.
LOAD KIT opens a menu where one of the up to 128 saved kits can be loaded. When this menu is opened the
kit list will appear. Select the kit to be loaded using the [ARROW] keys or the LEVEL knob. [LEFT]/[RIGHT] will