User Manual
Table Of Contents
- INTRODUCTION
- THE BACKGROUND OF THE ANALOG FOUR
- PANEL LAYOUT AND CONNECTORS
- ANALOG FOUR SIGNAL PATH
- OVERVIEW OF THE ANALOG FOUR STRUCTURE
- THE USER INTERFACE
- QUICK START
- KITS AND SOUNDS
- THE SEQUENCER
- CHAINS AND SONGS
- GLOBAL MENU
- EARLY STARTUP MENU
- TECHNICAL INFORMATION
- CREDITS AND CONTACT INFORMATION
- Appendix A: SYNTH TRACK PARAMETERS
- Appendix B: FX TRACK PARAMETERS
- Appendix C: CV TRACK PARAMETERS
- Appendix D: MIDI
- INDEX
PANEL LAYOUT AND CONNECTORS
4
19. <PATTERN PAGE> LEDs indicate how many pattern pages the active pattern consists of and which pattern
page is currently active.
20. [PAGE] selects the active pattern page. The active pattern page is indicated by the four LEDs above the
key. The secondary function gives access to the SCALE menu.
21. [KEYBOARD] buttons are used for playing sounds and assigning note values to note trigs. The first key is
called [KEYBOARD C1]. The secondary functions of the [KEYBOARD] keys access for example the KIT
and SOUND menus.
22. <OCTAVE> LEDs shows the octave range for the [KEYBOARD] keys.
23. [STOP] stops playback. The secondary function is a paste operation.
24. [PLAY] starts the playback of the sequencer. The secondary function is a clear operation.
25. [RECORD] key. Toggles GRID RECORDING mode on/off. Starts LIVE RECORDING if held while pressing
[PLAY]. The secondary function is a copy operation.
26. <BANK GROUP> LED indicating if bank group A-D or E-H is active.
27. [BANK D/H] key. Depending on the selected bank group, this button selects a pattern in either bank D or H.
The secondary function opens the PARAMETER SLIDE menu.
28. [BANK C/G] selects a pattern in either bank C or G. The secondary function opens the NOTE SLIDE menu.
29. [BANK B/F] selects a pattern in either bank B or F. The secondary function opens the ACCENT menu.
30. [BANK A/E] selects a pattern in either bank C or G. Depending on the selected bank group, this button
selects a pattern in either bank A or E. The secondary function opens the TRIG MUTE menu.
31. [TRIG] keys are used for entering trigs to the sequencer. Also used for choosing patterns.
32. [BANK GROUP] key. Selects the active bank group. The secondary function toggles between different
PATTERN modes.
33. <PATTERN MODE> LED. Indicates the selected PATTERN mode.
34. [FUNCTION] key. Press and hold for accessing secondary functions for some of the other keys. Secondary
functions are where possible written in red text on the panel.
REAR CONNECTORS
The Analog Four rear connectors:
1. Power on/off switch.
2. 12 V DC power in.
3. Hi Speed USB 2.0 connection.
4. MIDI thru.
5. MIDI out.
6. MIDI in.
7. CV CD outputs.
8. CV AB outputs.
9. Input L/R.
10. Main out L/R.
11. Headphones output.
21 3 4 5 6 7 8 9 10 11