User Manual

Page 19
EA Elektro-Automatik GmbH
Helmholtzstr. 31-37 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
www.elektroautomatik.de
[e-mail]
PSB 9000 2.5 kW Series
1.9.3 Scope of delivery
1 x Bidirectional power supply device
1 x Share Bus plug
1 x Remote sensing plug
1 x 1.8 m (5.9 ft) USB cable
1 x Set of DC terminal covers
1 x Share/Sense terminal cover (only with models from 500 V)
1 x USB stick with documentation and software
1 x AC connector plug (clamp type)
1xSetforstrainrelief&plugxture(pre-mounted)
1.9.4 Accessories
For these devices the following accessories are available:
Interface modules
IF-AB
Pluggable and retrottable,digital interfacemodules forRS232, CANopen, Ethernet,
Probus,ProNet,ModBusTCP,EtherCATorCANareavailable.Detailsaboutthein-
terface modules and the programming of the device using those interfaces can be found
in separate documentation. It’s usually available on the USB stick, which is included with
the device, or as PDF download on the manufacturers website.
1.9.5 Options
Theseoptionsareusuallyorderedalongwiththedevice,astheyarepermanentlybuiltinorpreconguredduring
the manufacturing process.
POWER RACKS
19“-rack
Racksinvariouscongurationsupto42Uasparallelsystemsareavailable,ormixed
with electronic load devices to create test systems. Further information in our product
catalogue, on our website or upon request
3W
GPIB interface
Replaces the standard slot for pluggable interface modules by a rigidly installed GPIB
port.Retrottingonlyuponrequest.ThedevicewillkeeptheUSBandanaloginterfaces.
Via the GPIB port, it can only support SCPI commands.