User Manual
1. Preamble
The EasyPS2000 software has been developed in order to remotely control and monitor PS 2000
B devices. It also offers functions to log data from the device or to run automated sequences in
form of tables.
The user can control only 1 unit with the software. In case there are several units connected to
the PC, the user has to select one of them.
2. Driver installation
Connect the unit to the PC via the included USB cable. Take care of tting the mini USB plug
correctly and tightly into the socket on the front (might require some force to push it in completely).
If the cable is too short for the nal placement of the unit, it can be extended by another USB cable
(max. 5m) or an USB hub. Windows installs the driver once for every PS 2000 B that is new to the
system. In case the driver is not already present on the system, it has to be installed once.
Windows should try to nd and install the driver like this:
Figure 1
Always select the lowermost option here (Windows XP/Vista/7). In the next dialogue windows
you are requested to point to the driver, which is located on the included CD in folder \driver.
The correct installation of driver and device can be veried by opening the device manager and
looking for
in section „Ports (COM & LPT)“. COM8 as well as the name are just an example. If multiple units
are connected to the PC, there should be multiple entries here.