User Manual

5.3 The application log
The application can record a log about events like actions done or errors. By default, this feature
is deactivated. In order to activate it, access the options in tab „Application“. See section 4.6 and
fFigure 17 on page 46.
To have a view into the log, go to menu „Help“ and select „View application log le“:
The application log le is called ps2_application_steps.csv by default. But you choose a different
name in the options dialogue in tab „Application“.
Like with the other log le, it is saved as text le in CSV format (entries seperated by semicolons):
Step Date Time
Voltage set to 3,100V. 13.12.2010 12:56:31
Voltage set to 0,000V. 13.12.2010 12:56:31
Scanned for PS2000. 13.12.2010 12:56:56
Voltage set to 0,400V. 13.12.2010 12:57:00
Voltage set to 6,300V. 13.12.2010 12:57:01
Voltage set to 17,600V. 13.12.2010 12:57:01
Voltage set to 26,250V. 13.12.2010 12:57:01
Voltage set to 42,150V. 13.12.2010 12:57:01
Voltage set to 49,600V. 13.12.2010 12:57:01
Voltage set to 59,450V. 13.12.2010 12:57:01
Voltage set to 71,000V. 13.12.2010 12:57:01
Voltage set to 80,100V. 13.12.2010 12:57:02