User Manual

• Application
Figure 17
▪ Application log le path
Denes and shows the path where the application stores its application log le (type CSV),
in case the feature is activated with „Save application log“ in the options.
▪ Application log le name
Only shows the name of the application log le.
▪ View Application log le
Opens the application log le, which has been dened in the options, in the assigned appli-
cation for viewing (eg. Excel or OpenOfce Calc).
▪ Save application log
Denes, if the application shall log events into a seperate log le.
Default setting: deactivated.
▪ Automatically activate remote control on start
Denes, if the selected PS 2000 B is automatically set into remote control mode after a
scan or start of the application. Default setting: activated.
▪ Restore set values on start
Denes, if the program shall store and restore the last set values that were set on the
device when the program was terminated normally. The storage of these values is tied to
the device serial number, so that changing the PS 2000 B model while the software is not
running won‘t restore wrong set values on the device after next start.
Default setting: deactivated