User Manual

Page 42
PS 9000 2U Series
www.elektroautomatik.de
[e-mail]
EA Elektro-Automatik GmbH
Helmholtzstr. 31-33 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
MENU Settings
Overview Profiles About HW, SW...
U = ____V I = ____A P = ____kW
Default Profile User Profile 1...5 Output Settings
Page 1 Page 2
Allow remote control: Yes | No Output after Power ON: OFF | Restore Analog interface range: 0...5V | 0...10V Share Bus mode: Slave | Master Voltage controller setting: Slow | Fast
Protection Settings OVP = ____V OCP = ____A OPP = ____kW Limit Settings
U-min = ____V U-max = ____V I-min = ____A I-max = ____A
P-max = ____W
General Settings Calibrate Device Reset Device
Communication
IP Settings 2
HMI Setup
Language: English|Deutsch
Display Setup Language
Brightness: 1...10
HMI Lock
HMI lock: Lock all | ON/OFF possible
Key Sound
Key sound: ON|OFF
Alarm Sound
Alarm sound: ON|OFF Contrast: 1...100Status Page Setup View mode: UI | UI(P) | UP(I)
IP Settings 1 View settings
Get IP address: Manual | DHCP IP address: 0.0.0.0 ... 255.255.255.255 Subnet mask: 0.0.0.0 ... 255.255.255.255 Gateway: 0.0.0.0 ... 255.255.255.255 Port: 0...65535 DNS address: 0.0.0.0 ... 255.255.255.255
Page 1 Page 2
Underlined parameters show the default value after delivery or reset.