User Manual

Page 23
EA Elektro-Automatik GmbH
Helmholtzstr. 31-33 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
www.elektroautomatik.de
[e-mail]
PS 9000 1U Series
2.3.3 Installing the device
• Select the location for the device so that the connection to the load is as short as possible!
• Leavesufcientspacebehindtheequipment,minimum30cm,forventilation!
• The device is not stackable!
• Do not put anything with a total weight of more than 1kg on top of the device!
A device in a 19” housing will usually be mounted on suitable rails and installed in 19” racks or cabinets. The depth
of the device and its weight must be taken into account. The handles on the front are for sliding in and out of the
cabinet.Slotsonthefrontplateareprovidedforxingthedevice(xingscrewsnotincluded).
Acceptable and inacceptable installation positions:
Standing surface
2.3.4 Connection to AC supply
• The device can be connected to any wall socket or multi-socket outlet, as long as those feature
a safety contact (PE) and are capable for 16 A.
• When connecting the device to a multi-socket outlet, along with other electric devices, it is
important to consider the total power consumption of all devices on the outlet, so that the
maximumcurrent(power÷mininumvoltage)doesnotexceedthedenitionforthewallsocket,
the multi-socket outlet and/or main distribution
• Before plugging in the input plug ensure that the device is switched off by its mains switch!
The device is delivered with a 3 pole mains cord (L, N, PE). If the device is going to be connected to a standard
2-phase or 3-phase supply, following leads and phases are required:
Nominal power Phases Supply type
1.5 kW / 3 kW L1 or L2 or L3, N, PE At least wall socket 16 A
The default input values of all models in this series are: 230 V, 16 A, 50 Hz. It is internally fused with 16 A. The 16
AinputdenitionisduetotheACinputcurrentdependingonthehigherintakeatlowACvoltage(forminimum
input voltage see technical specs).