User Manual

13
Instruction manual
PS 2000 B Triple Series
EN
Date: 11-21-2011
Safety instructions
• Only operate the device at a mains voltage as stipulated
on the type plate!
• Never insert mechanical parts, especially from metal,
through the air ventilation slots!
• Avoid any use of liquids of any kind in the proximity of
the device! They might get into it.
• Do not connect voltage sources to the device which are
able to generate voltages higher than the nominal voltage
of the device!
• Do not connect a voltage source with reversed polarity
to the output!
• After the output or even the device has been switched
off there can still be dangerous voltage on the output for
a certain time!
• Attention! The enclosure can heat up during operation
and may be hot!
General
About
Elektro-Automatik GmbH & Co. KG
Helmholtzstrasse 31-33
41747 Viersen
Germany
Phone: +49 2162 / 37850
Fax: +49 2162 / 16230
Web: www.elektroautomatik.de
Mail: [e-mail]
© Elektro-Automatik
Reprint, duplication or partly, wrong use of this user in-
struction manual are prohibited and might be followed by
legal consequences.