User Manual

Doc ID: BSEN
Date: 07-15-19
Page 13
Device mode = Regulaon mode (CV, CC, CP)
Error = last device error (OCP, OVP etc.)
Time = Time stamp, taken from PC’s clock
SOC = Baery’s state of charge (in %)
Temperature = Simulated baery temperature (in °C)
Internal resistance = Simulated internal baery resistance (in μΩ)
General:
• Logging starts only upon manual acon, i. e. clicking the “Start Logging” buon
• Logging either stops upon manual acon (“Stop Logging”) or, if acvated, on errors. This is acvated by default, because else
the log le might contain a lot of useless data entries
• Logging data can be added to an already exisng log le, but only if mode “Aach” is acvated; default is “Overwrite”