User Manual
Doc ID: BSEN
Date: 07-15-19
Page 7
5. Graphical user interface (GUI)
Aer being connected to a compable device, the main window will appear. It’s separated into two parts.
Figure 2 - Main window
In the upper part it shows simulaon related values and also the control for start and stop. For further details see below secons.
In the lower part there are three registers (tabs), for further details also see secons below. Overview:
Tab Descripon
Baery Simulator All setup for the simulaon
Device
Manual device control, including:
• Remote control on/o
• DC output on/o
• Set value adjustment
• Enter the “Sengs” app to congure some sengs on the device, same as on the HMI
It also shows some extra status informaon
Logging Congure and start/stop the logging feature